Log in to join the conversation.
Phase 10 Card Box - Storage Case for Card Games
Print Profile (3) Box with Phase 10 Logo 2h 39m 103 g PLA
Plate Details (1)
Plate Details (1)
Plate Details (1)
This is a sturdy, fully 3D-printable storage box designed specifically for the Phase 10 card game.
The original Phase 10 packaging is made of thin cardboard that tends to fall apart over time; this box is the robust, long-lasting replacement it deserves.
It fits all standard-sized playing cards ( 56 × 87 mm ), making it compatible with a wide range of card games, especially those by Mattel. The lid features the iconic Phase 10 logo, but a version without the logo is also included for a clean, universal look.
How to use it
- Print all parts as described below.
- To assemble the hinges, insert a short piece of 1.75 mm filament through the hinge pin holes on the lid and base. This is the only "hardware" needed; something every FDM printer user already has on hand.
- It is strongly recommended to secure the filament pin with a tiny drop of glue. Use as little as possible so that the hinge remains free-moving.
- Place your Phase 10 cards (or any compatible deck in 56 × 87 mm format) into the two internal compartments. Each slot accommodates a card stack up to 18 mm thick , which is more than sufficient for a full Phase 10 set.
- Close the lid, the integrated latches snap shut securely, keeping your cards safe during storage and transport.
Print Settings
Parameter Recommendation
Material Any Filament works; PLA or PETG recommendet
Infill 15-20%
Supports Required only under the latch overhangs on the underside of the closures - standard (manuall) supports are sufficient
Boost Me If you enjoy this model, I'd be absolutely thrilled to receive a free Boost, it really helps and means a lot to me.
The lid currently features the Phase 10 logo, but a version without the logo is also available for a clean and universal look. If you would like a version with a different card game logo. feel free to leave a comment.
