Monopoly Money Tray Compact

for Monopoly (1935) Layer by Layer

Alex

Inserts Free

View on MakerWorld 610 323 Added Mar 17, 26 | Updated Sep 3, 26 Support Alex by Liking and Boosting their model.

Plan Your Print

About 179 g of filament From the designer's print profile

Print Profile (2) 0.16mm layer, 2 walls, 15% infill 7h 15m 179 g PLA

0.16mm layer, 2 walls, 15% infill

1 plate 7h 15m 179 g PLA

H2S, H2D Pro, H2C, H2D

0.16mm default preset + monotonic internal solid infill pattern Cross Zag infill for finer support.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

7h 15m 179 g PLA · 179 g

0.18mm layer, 2 walls, 20% infill

1 plate 4h 22m 193 g PLA

P1S, A1, H2D, H2S, P2S, H2D Pro, X1E, H2C, X1, P1P, A2L, X1 Carbon, X2D

printed perfect at 20mm standard for a quicker print. already adjusted layer lines etc.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

4h 22m 193 g PLA · 193 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

Here is a smaller version of a Monopoly money tray I designed a while ago. Now that I have a Bambu H2S, I needed to make it a little smaller to fit on the bed. This tray keeps all your money and property nicely organized while still making it easy to grab cash. It displays all your properties upright and in order, so you know when you have a set.

The numbers were inset in Bambu Studio, so the raw STEP file does not have the numbers.

I filled the numbers with UV-curing colored resin I picked up from Amazon. Overall, it is a nice touch, but the resin likes to wick into the layer lines, so it can be a bit tricky to get it right without getting it all over the place.

I opted to print this at 0.16mm layer height but it will also work with 0.2mm, i find the overhang off the back prints a little nicer with the finer layer height.

Enjoy!

monopoly money tray for monopoly money tray