LayerUp Stats 11
Add Sep 1, 26 Sync Sep 2, 26
Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

Bang Box / Balloon Blast Box |Board Game V2

for Bang Box (1969) Layer by Layer
Hydrasam
Miniatures Free
View on MakerWorld 100 141 Added Sep 16, 24 | Updated Sep 1, 26 Support Hydrasam by Liking and Boosting their model.
Plan Your Print
✓ Optional multicolor profile The designer also offers a multicolor way to print this (an MMU/AMS profile or per-color parts)
About 349 g of filament From the designer's print profile
Print Profile (2) V2 Added storage lid and thicker nails 13h 48m 349 g PLA
V2 Added storage lid and thicker nails
5 plates 13h 48m 349 g PLA
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
V2 - Use this version V2 Based on user feedback I have made a couple of updates :) Thank you for the feedback • Added an optional pressure fit lid for the storage of parts • Decreased the tolerance in the nails from 0.5mm to 0.1mm by increasing the thickness of the nail body to 6.4mm the holes in the box are 6.5mm (old version of nails 6.0mm are still available in raw files and included a 6.35mm version just incase) • Removed 25 hole/nail version in favour of 30 hole version with further reductions in filament use ***Please be aware due to the tightened tolerances altering certain settings such as wall loops may cause issues with parts fitting correctly*** If in doubt about an already printed box print a single nail to test*** Everything printed in PLA, PLA+ could be used for additional durability for the nails. Edit: based on feedback will soon be adding thicker nails with less tolerance to improve gameplay! Will also be adding a lid to keep everything in one place :) 1. Box/lid Layer Height: 0.2 mm Walls: 2 walls (2.4 mm wall thickness) Infill: 5-10% (Gyroid or Grid pattern) Top/Bottom Layers: 3 layers Supports: None 2. Nails (Rounded) Layer Height: 0.16 mm Walls: 2 walls Infill: 30-40% (to ensure nail strength) Top/Bottom Layers: 3 layers Supports: No, print with nail head to bed 3. Hammer Layer Height: 0.20 mm Walls: 3 walls Infill: 30% (Gyroid or Grid for structural strength) Top/Bottom Layers: 3 layers Supports: No, print with hammerhead to bed handle facing up 4. Dice Layer Height: 0.16 mm Walls: 3 walls Infill: 30% (Grid for balance between strength and lightweight) Top/Bottom Layers: 3 layers Supports: Not required.
Plate Details (5)
0.4 mm nozzle, all plates
Plate 1 · 30 nail version
5h 2m 184 g PLA · 184 g
Plate 2 · nails v2 6.4mm
4h 39m 70 g PLA · 70 g
Plate 3 · hammer
1h 51m 25 g PLA · 18 g PLA · 7 g
Plate 4 · dice
43m 16 g PLA · 16 g
Plate 5 · Lid v3 3mm
1h 31m 54 g PLA · 54 g
Box.20 layer, 2 walls 10% Others 16 layer, 2 walls, 30% infi
5 plates 13h 48m 349 g PLA
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
## Everything printed in PLA, PLA+ could be used for additional durability. Edit: based on feedback will soon be adding thicker nails with less tolerance to improve gameplay! Will also be adding a lid to keep everything in one place :) ## ## 1. Box • Layer Height : 0.2 mm • Walls : 2 walls (2.4 mm wall thickness) • Infill : 5-10% (Gyroid or Grid pattern) • Top/Bottom Layers : 3 layers • Supports : None • Filament Usage : Reduced by lowering infill and wall thickness • Print Speed : 50-70 mm/s ## 2. Nails (Rounded) • Layer Height : 0.16 mm • Walls : 2 walls • Infill : 30-40% (to ensure nail strength) • Top/Bottom Layers : 3 layers • Supports : No, print with nail head to bed ## 3. Hammer • Layer Height : 0.16 mm • Walls : 3 walls • Infill : 30% (Gyroid or Grid for structural strength) • Top/Bottom Layers : 3 layers • Supports : No, print with hammerhead to bed handle facing up ## 4. Dice . • Layer Height : 0.16 mm • Walls : 3 walls • Infill : 30% (Grid for balance between strength and lightweight) • Top/Bottom Layers : 3 layers • Supports : Not required.
Plate Details (5)
0.4 mm nozzle, all plates
Plate 1 · 30 nail version
5h 2m 184 g PLA · 184 g
Plate 2 · nails v2 6.4mm
4h 39m 70 g PLA · 70 g
Plate 3 · hammer
1h 51m 25 g PLA · 18 g PLA · 7 g
Plate 4 · dice
43m 16 g PLA · 16 g
Plate 5 · Lid v3 3mm
1h 31m 54 g PLA · 54 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description

Check out the halloween edition!

https://makerworld.com/en/models/685926#profileId-614537

V2 Based on user feedback I have made a couple of updates :) Thank you for the feedback

  • Added an optional pressure fit lid for the storage of parts
  • Decreased the tolerance in the nails from 0.5mm to 0.1mm by increasing the thickness of the nail body to 6.4mm the holes in the box are 6.5mm (old version of nails 6.0mm are still available in raw files and included a 6.35mm version just incase)
  • Removed 25 hole/nail version in favour of 30 hole version with further reductions in filament use

***Please be aware due to the tightened tolerances altering certain settings such as wall loops may cause issues with parts fitting correctly*** If in doubt about an already printed box print a single nail to test***

This is the first 3D modelling project I've uploaded! I'm new in the world of both printing and modelling the project was created in fusion360 which is the Balloon Bang Game set featuring a box, nails, a hammer, and a dice.

I searched for a file after watching people play one on YouTube and could only find one behind a paywall, which defeats the purpose of not buying the game…

It's a simple design but fun family game for 2–4 Players that’s easy to print, doesn't require any assembly and only requires the addition of some small balloons (I recommend water balloons as they pop easier when filled with air and up the stakes when filled with water). All components are optimized for durability and minimal filament usage to the best of my abilities.

I’ve kept the design approachable for newcomers to 3D printing like myself and that included making sure it was A1 mini friendly. I chose a dice over a wheel due to the ease of designing and printing. The hammer can be printed in multicolour simply by pausing the print at the desired layer (depending on layer height) and the dice can be coloured by a sharpie or paint marker although is readable in solid colour. Using an AMS to colour will drastically increase the print time.

I welcome any feedback or suggestions from the community to help me improve my design, my printing and my modelling skills.

Whether you're new to 3D printing or an experienced maker, feel free to download, print, and enjoy! If you have any tips for refining this or suggestions for future projects, I’d love to hear from you and have a chance to give back. Thank you for checking out my work!

The nails are quite pointy be careful with small children!
Boost Me Boosting is a great free way to support me in buying more filament to learn, experiment and design more models!

nail 3d printable game balloon pop game balloon bang family game hammer nails dice fun tabletop
Bang Box box art Bang Box 1969 Layer by Layer
Cover Colors

Main colors from the cover art. Find matching filament, or tap swatches to narrow.

Matching filament