Grimcoven Insert (supports minis and 3d terrain)

Grimcoven Insert

No lid lift
Supports all the minis included with the main game
Supports either standee terrain or the 3d add on terrain
Supports sleeves (I used premium 90 micron thick sleeves which match the Paladin sleeves available in the kickstarter)
Supports vertical or horizontal storage (nothing should move around, even if you shake the box)

Largest model : 215mm x 125mm (minimum bed size)
Note: if you need me to split a model, I am more than happy to do so.
Total grams at default .2 bambu lab slicer settings (except 8% gyroid infill) : 1868 (mini terrain addon) or 1805 (base standee terrain)

Note: If you have the 3d terrain, print all 3 of the "Terrain - Minis" models, for the standee terrain, print both of the "Terrain - Standee" models (one of the standee pieces will remain empty).

Print settings: normal for your filament, no supports needed and I recommend 8% infill minimum

Note on multi color printing for text:
All of the multi color printing for this insert was accomplished with adding pauses in the slicer and doing filament swaps.
If you would like details on how to accomplish this with your printer and slicer, do a google search like 'how to I add pauses in Bambu Studio for filament swaps'. Basically, you slice the model, go to the layer you want a filament swap at (one for the text color then possibly one to change back to the predominant color) then you will issue the command to add a pause (right click on the slider for most slicers).

Note on print orientation:
All of the models should print with no need for support in the orientation I have supplied for the models. Some models print in an orientation other than the orientation they are stored in the box for this reason.

My priorities when designing inserts:
Reduce game setup and tear-down time
Support sleeved cards
Make trays that can be used during gameplay
No (or very little where impossible) lid lift
Create models that do not need any support (when possible)
Create models that optimize filament use (when possible)