LayerUp Stats
Add Sep 14, 26 Sync Sep 14, 26
Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

Skip-Bo Card Box (bigger)

for Skip-Bo (1967) Layer by Layer
threadstone
Replacement Box Free
View on MakerWorld 131 702 Added Sep 21, 23 | Updated Sep 13, 26 Support threadstone by Liking and Boosting their model.
Also Found On Printables 50 Andi
Remix View the original model
Plan Your Print
About 128 g of filament From the designer's print profile
Print Profile (3) 0.2mm layer, 3 walls, 15% infill 4h 49m 128 g PLA
0.2mm layer, 3 walls, 15% infill
4 plates 4h 49m 128 g PLA
P1P, P1S, X1, X1 Carbon, X1E, A1, A1 mini, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
• 0,20mm layer height • 3 walls • 4 top layers • 4 bottom layers • 15% rectilinear infill • no support needed
Plate Details (4)
0.4 mm nozzle, all plates
Plate 1
1h 30m 41 g PLA · 34 g PLA · 5 g PLA · 2 g
Plate 2
1h 51m 60 g PLA · 60 g
Plate 3
1h 3m 20 g PLA · 20 g
Plate 4
26m 7 g PLA · 7 g
Stronger, 0.2mm layer, 4 walls, 25% infill, 2 walls for the logo inlay only
4 plates 4h 59m 142 g PLA
P1S, P1P, X1, X1 Carbon, X1E, A1, A1 mini, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
• Walls to 4 and Infill to 25% for a bit more strength • A local modifier was added for the logo to only have 2 perimeters for the logo making it look nicer
Plate Details (4)
0.4 mm nozzle, all plates
Plate 1
1h 35m 45 g PLA · 2 g PLA · 40 g PLA · 3 g
Plate 2
1h 56m 64 g PLA · 64 g
Plate 3
1h 6m 26 g PLA · 26 g
Plate 4
22m 7 g PLA · 7 g
0.12mm layer, 3 walls, 15% infill
3 plates 4h 47m 127 g PLA
X1 Carbon, P1S, P1P, X1, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
3 color, 3 walls, 0,12 fine layer 3 plates
Plate Details (3)
0.4 mm nozzle, all plates
Plate 1
1h 39m 40 g PLA · 2 g PLA · 4 g PLA · 34 g
Plate 2
2h 4m 60 g PLA · 60 g
Plate 3
1h 4m 27 g PLA · 27 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description

This is a remex of the Skip-Bo Card Box from Markus_p from printables (Thank you very much for providing your model data!!). I had the problem that not all cards are inside of the inner box and I wanted to put also the instructions in the box. So I made a 5mm higher version.

This box also has an modified logo on top. This version can be printed with multiple color without any recesses.

The inner box can be glued in the bottom box. To do this, orient the small dot on the inner part opposite the hinges.

Needes parts for assambley:
6x screw M3x30

skipbo skipbocardbox cardbox
Skip-Bo box art Skip-Bo 1967 Layer by Layer
Cover Colors

Main colors from the cover art. Find matching filament, or tap swatches to narrow.

Matching filament