Frostpunk: The Board Game - Insert

I designed my own insert for FrostPunk. I like to have inserts without using too not much material. All walls are 1mm thick, and I am printing a 0.5mm width, so 2 lines makes all the walls. All my prints are done with no top and no bottom, only 40% infill with tri-hexagon infill pattern. This is why we can see though the covers and the bottoms of the trays. I do 3 walls so the bottom layers are solid.

I planned the Card trays to fit sleeved cards, but I haven't received my sleeves yet, so I couldn't test it. I will be using Paladins 90microns Sleeves.

In the main box, I have all the following that fits:
- Frostpunk: The Board Game
- Dreadnought Miniature Exansion
- Frostlander Expansion
- Ressources Exansion

I used foam from the Kickstarter Box Shipping to secure the Dreadnought and the Generator inside their own tray.

For the big trays that are split in 2 pieces, I glued them together with crazyglue.

Here is the List of Items you will need:
- 1x FP_Generator_Tray
OR if using a small printer
- 1x FP_Generator_Tray_P1
- 1x FP_Generator_Tray_P2
- 1x FP_Dreadnought_Tray
OR if using a small printer
- 1x FP_Dreadnought_Tray_P1
- 1x FP_Dreadnought_Tray_P2
- 1x FP_Border_Tray
OR if using a small printer
- 1x FP_Border_Tray_P1
- 1x FP_Border_Tray_P2
- 3x FP_Building_Tray
- 1x FP_Hex_Tile_Tray
- 1x FP_Large_Card_Tray
- 1x FP_MultiFunctionTray1
- 1x FP_MultiFunctionTray2
- 2x FP_MultiFunctionTrayCover
- 1x FP_RessourceTray1
- 2x FP_RessourceTray2
- 3x FP_RessourceTray3
- 6x FP_RessourceTrayCover
- 1x FP_Small_Card_Tray
- 1x FP_Filler1 (Goes under the 3 Building Trays)
- 1x FP_Filler2
- 1x FP_Filler3
- 1x FP_Filler4