Insert / Organizer for The Rock of Chickamauga by Flying Pig Games

This insert supports sleeved cards and side storage.
It relies on the border strips to pad out the insert; if you don't have them you'll have to print a spacer to take their place.
Like A Most Fearful Sacrifice, this game is *REALLY* tight on space. It does *NOT* have room for the spiral-bound rules; I just store those in my Pipe Creek box.
Quantities required:
TRoC_Card Tray.stl 1x
TRoC_Faction Box_CUSA.stl 2x (1 in each faction color)
TRoC_Marker Box_Shared.stl 1x
TRoC_Unit_Box_3x2.stl 6x (3 in each faction color)
TRoC_Unit_Box_4x2.stl 3x (2 CSA, 1 USA)
TRoC_Unit_Box_5x2.stl 3x (2 CSA, 1 USA)
TRoC_Unit_Box_9x2.stl 1x (1 USA)
TRoC_Unit_Box_ID_Underlay_v3.stl 1x
TRoC_Unit Box_ID_USA_v3.stl 1x
TRoC_Unit Box_ID_CSA_v3.stl 1x

TRoC_CSpacer_Large_x and TRoC_CSpacer_Small_x - varies

Print the Unit Boxes in the appropriate color for the faction. Print the UNIT ID Underlay in a light color (I did white) and the UNIT ID CSA or USA in the same color as the boxes or darker. Then pop an underlay in the ID square and the appropriate Unit ID on top. See the pictures to see the mix.
Print counter spacers (Large for Unit boxes, Small for the Faction and Marker boxes) to fit your needs. The number in the cspacer file equals HOW MANY COUNTERS go in the slot.
Note - I used to design the box slots to have the specific heights required for the stacks it was meant to store. I switch to the full-depth plus spacer model to allow for each person to decide how they wanted to spread the stacks out as well as to allow for any future expansion/errata counters that may come along.