Dice Commandos [Solo Game of the Month] insert

[Solo Game of the Month]

This is an organizer designed to fit the Dice Commandos package case.

[Key Features]

• Can store cards including a 0.05mm sleeve (for 63x88mm cards, cards cannot be stored if sleeves thicker than 0.06mm are used)
• Divided into card tray bundles, token boxes, etc., allowing printing even with the A1 mini printer
• Internal height margin for storing rulebooks (about 1~2mm)
• Hinged cover on the token box designed to allow the game box to stand and store (requires 3x2mm magnet)

(Note: The hinge part of the case is thin, so under heavy load, the hinge of the lid may easily break.)

[Additional Information]

• For items like token boxes or hinge cover fixing parts, use adhesive to place 3x2mm magnets in each. (Storage and fixing available)

※ If the bottom appears to be attached when printing the case,

If you carefully fold the hinge part, the attached part is thin and comes off relatively easily.

(For smooth operation when printing the hinge section, we recommend using a 0.12mm layer output.)

※ Please note that this method uses Bamboo Studio's top/bottom layer 0 and internal fill output settings.

(If you are printing with another slicer, please use the internal fill settings separately.)

(+ If you are concerned about the durability of the mesh section, you can reset the output settings for that part of the object to output in a filled form.)