7th Inning Stretch insert (Box Ver.)

[Solo Game of the Month]

The new Box ver. of 7th Inning Stretch. This organizer is designed to fit the package case.

[Key Features]

• Includes card sleeves (0.07mm standard) for storage (with additional card expansion, 0.1mm sleeves expected to be available)
• Divided into individual card trays, token boxes, etc., allowing printing even with A1 mini printers
• Double-layer game board, with ample internal height space for storing rulebooks (approx. 7mm)
• Hinged cover on the token box designed to allow the game box to stand and store (requires 3x2mm magnet)

(Note: The hinge part of the case is thin, so under heavy load, the hinge of the lid may easily break.)

[Additional Information]

• For items like token boxes or hinge cover fixing parts, use adhesive to place 3x2mm magnets in each. (Storage and fixing available)

※ If the bottom appears to be attached when printing the case,

If you carefully fold the hinge part, the attached part is thin and comes off relatively easily.

(For smooth operation when printing the hinge section, we recommend using a 0.12mm layer output.)

※ Please note that this method uses Bamboo Studio's top/bottom layer 0 and internal fill output settings.

(If you are printing with another slicer, please use the internal fill settings separately.)

(+ If you are concerned about the durability of the mesh section, you can reset the output settings for that part of the object to output in a filled form.)