LayerUp Stats 9

Add Sep 27, 26 Sync Sep 27, 26

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

TCG Modular Drawer System

Organizers Free

View on MakerWorld 560 2,625 Added Jul 24, 24 | Updated Sep 27, 26 Support gadjet by Liking and Boosting their model.

Plan Your Print

About 349 g of filament

Print Profile (15) 180mm Drawers (Kallax Compatible) (A1Mini) 18h 37m 562 g PLA

180mm Drawers (Kallax Compatible) (A1Mini)

7 plates 18h 37m 562 g PLA

A1 mini, A1, X1 Carbon, X1E, X1, P1P, H2D, P1S, H2D Pro, H2S, P2S, H2C, X2D, A2L

Plate Details (7)

0.4 mm nozzle, all plates

Plate 1 · Outer Box (Kallax)

6h 14m 203 g PLA · 203 g

Plate 2 · Draw

2h 48m 99 g PLA · 99 g

Plate 3 · Front and Back Connectors

21m 7 g PLA · 7 g

Plate 4 · Handle + MTG Dividers

49m 24 g PLA · 24 g

Plate 5 · Basic Dividers

32m 13 g PLA · 13 g

Plate 6 · Double Spacers (optional)

3h 18m 101 g PLA · 101 g

Plate 7 · Lots of spacers (optional)

4h 35m 115 g PLA · 115 g

250mm Drawers (Kallax Compatible)

6 plates 18h 38m 593 g PLA

A1, H2D, P1P, X1E, P1S, X1 Carbon, X1, H2D Pro, H2S, P2S, H2C, X2D, A2L

Plate Details (6)

0.4 mm nozzle, all plates

Plate 1 · Outer Box (Kallax)

8h 51m 280 g PLA · 280 g

Plate 2 · Draw

3h 47m 134 g PLA · 134 g

Plate 3 · Front and Back Connectors

22m 7 g PLA · 7 g

Plate 4 · Handle + MTG Dividers

50m 24 g PLA · 24 g

Plate 5 · Basic Dividers

32m 13 g PLA · 13 g

Plate 6 · Double Spacers (optional)

4h 16m 135 g PLA · 135 g

(Legacy) 0.2mm layer, 2 walls, 14% infill

5 plates 11h 25m 349 g PLA

A1 mini, A1, X1 Carbon, X1E, X1, P1P, H2D, P1S, H2D Pro, H2S, P2S, H2C, X2D, A2L

Plate Details (5)

0.4 mm nozzle, all plates

Plate 1 · Outer Box

6h 46m 206 g PLA · 206 g

Plate 2 · Draw

2h 56m 99 g PLA · 99 g

Plate 3 · Front and Back Connectors

21m 7 g PLA · 7 g

Plate 4 · Handle + MTG Dividers

50m 24 g PLA · 24 g

Plate 5 · Basic Dividers

32m 13 g PLA · 13 g

Long Version (25CM)

6 plates 20h 3m 596 g PLA

A1, P1S, P1P, X1 Carbon, X1E, X1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

This model is extended to fit the maximum bed size of 256x256x250. There is also a draw with double the amount of spacers included.

Plate Details (6)

0.4 mm nozzle, all plates

Plate 1 · Outer Box

9h 58m 283 g PLA · 283 g

Plate 2 · Draw

3h 55m 134 g PLA · 134 g

Plate 3 · Front and Back Connectors

19m 7 g PLA · 7 g

Plate 4 · Handle + MTG Dividers

50m 24 g PLA · 24 g

Plate 5 · Basic Dividers

32m 13 g PLA · 13 g

Plate 6 · Draw (Double Spacers)

4h 29m 135 g PLA · 135 g

Draws with different spacing options

2 plates 7h 58m 216 g PLA

A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1 · Doubel Spacers

3h 22m 101 g PLA · 101 g

Plate 2 · Lots of Spacers

4h 37m 115 g PLA · 115 g

Label Insert

2 plates 33m 8 g PLA

A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1 · Flush Text

19m 4 g PLA · 3 g PLA · 1 g

Plate 2 · Raised Text (Less Filament)

14m 4 g PLA · 3 g PLA · 1 g

Box Lock

1 plate 14m 3 g PLA

A1 mini, P1S, H2D, A1, X1 Carbon, X1, X1E, P1P, H2D Pro, H2S, P2S, H2C, X2D, A2L

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

14m 3 g PLA · 3 g

Connectors only - loose fitting

1 plate 19m 7 g PLA

A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Someone found the connectors too tight so here are some looser ones if needed.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

19m 7 g PLA · 7 g

Pokemon Inserts - Single and Multi Color Versions

2 plates 52m 18 g PLA

A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1 · Single Color

20m 7 g PLA · 7 g

Plate 2 · Multi Color

32m 11 g PLA · 1 g PLA · 9 g PLA · 1 g

0.16mm layer, 2 walls, 10% infill

1 plate 6h 45m 273 g PLA

P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Moves everything to a single plate that you need. Wouldn't suggest it if you want multicolor but this will allow a quick overnight build of the box. Pick one of the card dividers and copy it if you would like dividers.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1 · Single Plate

6h 45m 273 g PLA · 273 g

0.2mm layer, 2 walls, 10% infill (honeycomb)

2 plates 16h 4m 466 g PLA

P1S, P1P, X1 Carbon, H2D, A1, X1, P2S, X1E, H2S, H2D Pro, H2C, X2D, A2L

Added two different profiles of the 250mm boxes; both side walls as honeycomb and the other all sides honeycomb in order to decrease the amount of filament required while still maintaining structural strength. This allows you to print 4 copies with a single roll of filament.

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1

8h 30m 224 g PLA · 224 g

Plate 2

7h 34m 242 g PLA · 242 g

250mm long storage connectors for kallax version

1 plate 22m 11 g PLA

X1 Carbon, P1P, X1, A1, P1S, H2S, X1E, P2S, H2D Pro, H2C, H2D, X2D, A2L

Long version of the connectors going end to end. The back end is secured with the printed C-clip.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

22m 11 g PLA · 11 g

0.16mm layer, 2 walls, 10% infill

1 plate 5h 40m 125 g PLA

X1 Carbon, P1S, P1P, X1, X1E, A1, A1 mini, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Identique au modèle de base, mais avec des encoches pour les séparateur plus régulièrement afin d'optimiser la place au maximum.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

5h 40m 125 g PLA · 125 g

0.2mm layer, 2 walls, 14% infill

5 plates 11h 36m 349 g PLA

A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Plate Details (5)

0.4 mm nozzle, all plates

Plate 1 · Outer Box

6h 58m 206 g PLA · 206 g

Plate 2 · Draw

2h 57m 99 g PLA · 99 g

Plate 3 · Front and Back Connectors

19m 7 g PLA · 7 g

Plate 4 · Handle + MTG Dividers

50m 24 g PLA · 24 g

Plate 5 · Basic Dividers

32m 13 g PLA · 13 g

Riftbound Divider | 0.2mm layer, 2 walls, variable infill

2 plates 9h 25m 317 g PLA

A1 mini, P1P, H2D, X1 Carbon, P2S, P1S, H2D Pro, X1E, H2C, A2L, A1, X2D, H2S, X1

Plate features custom made League of Legends Riftbound divider measured to fit original divider slots. - 0.2 Layer Height - No Supports - 2 Walls - Variable Infill (0-7%)

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1 · Riftbound Dividers

39m 20 g PLA · 20 g

Plate 2 · tcgDrawSystem - Lite

8h 46m 297 g PLA · 297 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

This is a modular storage system designed to fit most card trading games.

The 180mm drawer will fit approximately 550 unsleeved cards and the 250mm drawer around 750.

It will also fit outer sleeved cards (have tested ultimate guard katana)

It has a space at the front to display a card or information on the drawers contents, and there are different spacing options for dividers.

Everything prints with no supports and is optimised for minimal filament usage.

Can be printed on bed sizes 180x180mm and up.

Update - 06/2025

I have now modified the outer case to fit Ikea Kallax cubes in a 4 x 3 grid. The internal drawer is unchanged so if you have printed these they will still fit :)

(This will be the main version going forward.)

I have simplified the print files so there is one for 180mm drawers (A1 Mini) and one for 250mm drawers (A1/P1/X1)

Big thanks to @3DN00bTube for helping with this.

Update - 03/2025 - I have included a version to fit 256mm bed sizes. The draw itself is 25cm's long.

Happy Printing :)

Update:

I have remodeled my Card Dividers to now fit this system, you can find them here:

https://makerworld.com/en/models/374802#profileId-274743

Please boost for boosters :)

magic the gathering mtg tcg mlb pokemon draw draws modular drawer lorcana