Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Screw top tube to hold checkers pieces or anything with a 25mm external diameter or less
Designer's Description
Checkers pieces have a habit of getting lost so secure them in this container!
Note: Not really a remix as its a new design but it was built to complement the model here so I added it as a remix so its easy to find for people.
Print Settings Setting
Walls 2+
Layer Height 0.2mm
Nozzle 0.4mm
Material PLA+ but most filaments will work.
Infill 15%
Supports None
Other Print in the supplied orientation
PS: Internal diameter is 25mm so anything with that external diameter can fit in this tube.
/pic2736337.jpg)