Darwin's Journey (retail version) vertical boardgame insert

Vertical box insert for the retail version of Darwin's Journey (expansions not included).
The insert was mainly designed for people who prefers to store their games vertically on the shelf, but it is just as stable when used horizontally.

Not only serves as storage, but makes the setup a LOT faster, even by adding elements directly to the board. Also provides resource trays in the form of lockable chests and small trays.

To get the complete insert you need to print several STLs multiple times, the complete list:

upper left corner:
1x beagle_mail_deck
1x third_journal_pages

upper right corner:
1x tray_rack
2x tray_objectives
1x tray_creatures
4x tray_museum
1x tray_misc
1x tray_lid

left section (chests and solo deck holder)
2x halfdeck
2x box_narrow_body
2x box_narrow_lid
3x box_normal_body
3x box_normal_lid
and either
10x box_backlatch_side_thightfit
5x box_backlatch_middle_thightfit
10x box_frontlantch_thightfit
or
10x box_backlatch_side_loosetfit
5x box_backlatch_middle_loosefit
10x box_frontlantch_loosefit
the difference between the thight and loose ones is 0.2mm width, which can seem negligable but depending on the printer makes huge difference.

player component holders:
4x player_back
4x player_tents
4x player_stamps
For latch joints:
4x player_cover_latch + player_cover_back (printed together, align them over each other on the spine)
4x player_pages_latch
For cylindrical magnet joints (5mm diameter, 2mm height):
4x player_cover_slot6 + player_cover_back (printed together, align them over each other on the spine)
4x player_pages_slot6

extra trays:
1x stampbox
1x stamptray
1x vaxbox