Printable die (dice) for Bako: Dig n Write

Printed on Prusa Mk3s+ in PLA at 100% size with 0.25mm nozzle, 0.10 mm layer height and 20% cubic infill.

Printing the full die: print by rotating 45 degrees on every axis and printing supports for the three edges. This allows for smooth faces and somewhat consistent weighting. You can also put some paint in the recesses on each face and sand it flat with a high grit sandpaper for a nice finished look.

Printing the hollow die: this can be glued around an existing 16mm die (or the provided 16mm cube). A layer change can make for some nice accent colors. Sand the edges and corners as necessary.

Printing the “empty" die: print similar to the full cube (45 degree rotations and supports) for nice edges and somewhat even weighting. Each face can be printed flat (another opportunity for layer change colors!) and slotted into the cube by just press fitting into place with a dab of super glue to hold it.

Permission was granted by RAWR! games to publish this file. Find out more at https://www.instagram.com/rawrgamestudio/