Radlands (Retail Version) SnapLock Case

I wanted a more--rugged travel box for my retail version of Radlands, so I customized an existing SnapLock box and card holder, and I created a water-token holder that also doubles as a token tray.

I used an AMS with PLA Basic White, Black, Magenta, and Cyan to print all of these parts.

I used Mesh Graffiti from MakerLab to add the Radlands artwork to the top of the box and to the water token holders.

I used a smooth print plate to get the finish I wanted on the box and water token trays.

NOTE : You should print the lid and token trays using a .02 mm nozzle to get the detail needed for this to look right.

I included another profile if you want the case without the artwork for those without an AMS or a smaller nozzle.

I designed the water-token trays to hold these token models: https://makerworld.com/en/models/951074-radlands-water-tokens#profileId-919024

I created the outer box using the SnapLock 2.0 Parametric project here: https://makerworld.com/en/models/697142-snaplock-2-0-parametric-beta?from=search#profileId-626132

I created the inner card trays using the SnapLock Card Box + Insert Parametric project here: https://makerworld.com/en/models/721022-snaplock-card-box-insert-parametric-beta?from=search#profileId-651922