Mexican Train Game complete with Box, 91 dominos Station and domino Stands

If you like the game, this is complete, everything you need is here including a nice storage box, 91 Domino's, station and domino stand… all fits in box…. SCORE SHEET INCLUDED

Printing is long, on a Bambu printer all piece take a total of about 18hrs.

on a standard printer like a Enders etc will take 65-70hrs

the domino's are printed in PLA , the rest I did in ABS.

setting for all .04 nozzle, standard 0.20 with 25% fill

The Domino's are in 6 sets, i print 2 set (part 1 and 2) at once on the P1P printer with AMS for 2 colors, SHUT OFF PRIME TOWER under OTHERS, on a X1 you will need to prints them 1 set a time or shut off the flow calibration to have the space needed

all other parts i print in ABS on the X1 Carbon, always do a calibration before printing the box or cover they need to be perfect so the cover snaps on and stays on..i do the cover in 2 tone as well, if you want the logo to stand out print cover main color in slicer layer 5 and 6 change to secondary color for logo, then layer 7 change back to primary color…once again SHUT OFF PRIME TOWER under OTHERS.

all can be printed in PLA, i choose to use ABS for 2 main reasons , it prints larger parts faster and ABS is better for weather outside and more heat resistant in the sun.

TIP … Cover and Box should be Printed on the same printer, the tolerance are so tight just being off 0.10 will cause cover to be loose or to tight… THERE IS A SAMPLE DOMINO 12/12 TO TEST PRINT SO YOU CAN PRINT 1, ALSO USE THE TEST FILE TO SET COLORS IT WILL SLICE FASTER.

Total Time on a Bambu is 18hrs and a roll of Filament total..

I LOOK FORWARD TO YOUR COMMENTS TO IMPROVE WHAT IS ALREADY GREAT

ENJOY

ALL FILES ARE BASIC STL FILES SO YOU CAN USE 0.20/50% OR WHAT YOU PREFER