Log in to join the conversation.
ES: Guerra del Anillo: El Juego de Cartas – Pack de Bandejas de Jugador y Cápsulas/Fundas para Tokens EN: War of the Ring: The Card Game – Player Card Trays & Token Capsule Sleeves (Full Upgrade Pack)
Take your War of the Ring: The Card Game games to the next level with this complete 3D printed upgrade pack!
This design includes card organizer trays for each player and a complete set of protective capsules/frames for all cardboard tokens, improving table ergonomics, component durability, and the visual presence of the game.
✨ What does this design include?
Player Trays for Cards (Deck Holders):
Dedicated compartments for draw deck, discard, and active reserves/cards.
Angled side slots for easy placement and consultation of cards without taking up extra table space.
Compatible with standard and premium thickness sleeved cards.
Bottom/center gap optimized to save material and facilitate the removal of mallets.
Token Sleeves/Capsules:
Two-Tone Combat Token Capsules: Designed to assemble in two colors (blue/red) to reflect the two faction/status faces.
Capsules for Ring/Corruption/Eye/Special Marker tokens.
Frame for the rectangular token with dual tone option (Free Peoples/Shadow).
Capsules for damage/skull tokens.
Snap-fit protects the cardboard from wear and tear and provides weight and unbeatable tactile feel when handling the tokens.
⚙️ Recommended Print Settings
Material: PLA/PETG
Layer Height: 0.16 mm – 0.20 mm (for trays) | 0.12 mm – 0.16 mm (for better detail in token capsules)
Walls/Perimeters: 2 or 3
Infill: 15% – 20% (Grid or Gyroid)
Supports: NO supports required (clean and direct printing).
Color Tip: Print the trays and capsule halves in Blue (Free Towns) and Red (Shadow), plus dark/anthracite tones for the damage/skull markers.
---------------------------------------------
Upgrade your War of the Ring: The Card Game experience with this complete 3D printable accessory kit!
This design features ergonomic player card trays and snap-fit protective token capsules for all cardboard tokens, improving table organization, card handling, and component protection.
✨ What's included?
Player Card Trays / Holders:
Holds draw deck, discard pile, and active/played cards.
Angled side slots to keep cards upright and visible, saving valuable table space.
Fully compatible with premium sleeved cards.
Material-saving design with easy-grab bottom cutouts.
Token Capsule Sleeves (Snap-Fit):
Dual-color combat token rims: Print in two colors (Blue & Red) to match opposing sides.
Ring & Special Marker Sleeves: Perfectly fitted to cardboard tokens.
Rectangular token frame: Optional dual-color print (Free Peoples / Shadow).
Damage / Skull token holders: Clean border finish in dark/charcoal PLA.
Snug fit that protects token edges from wear while adding satisfying tactile weight.
⚙️ Print Settings
Material: PLA/PETG
Layer Height: 0.20 mm (Trays) | 0.12 – 0.16 mm (Token Capsules)
Perimeters/Walls: 2–3
Infill: 15% – 20%
Supports: None required (100% support-free print)
Recommended Filament Colors: Red, Blue, Grey/Black, White/Gold.
Translated from Spanish - show original
¡Lleva tus partidas de Guerra del Anillo: El Juego de Cartas al siguiente nivel con este set completo de mejora (upgrade pack) impreso en 3D!
Este diseño incluye bandejas organizadoras de cartas para cada jugador y un juego completo de cápsulas/marcos protectores para todos los tokens de cartón, mejorando la ergonomía en mesa, la durabilidad de los componentes y la presencia visual del juego.
✨ ¿Qué incluye este diseño?
Bandejas de Jugador para Cartas (Deck Holders):
Compartimentos dedicados para mazo de robo, descarte y reservas/cartas activas.
Ranuras laterales en ángulo para colocar y consultar cartas fácilmente sin ocupar espacio extra en mesa.
Compatibles con cartas enfundadas (sleeved cards) de grosor estándar y premium.
Hueco inferior/central optimizado para ahorrar material y facilitar la extracción de los mazos.
Cápsulas y Marcos Protectores de Tokens (Token Sleeves/Capsules):
Cápsulas bicolores para tokens de combate: Diseñadas para ensamblar en dos colores (azul/rojo) para reflejar las dos caras de facción/estado.
Cápsulas para tokens de Anillo / Corrupción / Ojo / Marcadores especiales.
Marco para el token rectangular con opción de doble tono (Pueblos Libres / Sombra).
Cápsulas para tokens de daño/calavera.
Encaje a presión (snap-fit preciso) que protege el cartón del desgaste y aporta peso y sensación táctil inmejorable al manipular los tokens.
⚙️ Parámetros de Impresión Recomendados
Material: PLA / PETG
Altura de capa: 0.16 mm – 0.20 mm (para las bandejas) | 0.12 mm – 0.16 mm (para mejor detalle en las cápsulas de tokens)
Paredes / Perímetros: 2 o 3
Relleno (Infill): 15% – 20% (Grid o Gyroid)
Soportes: NO requiere soportes (impresión limpia y directa).
Consejo de color: Imprime las bandejas y las mitades de las cápsulas en Azul (Pueblos Libres) y Rojo (Sombra), además de tonos oscuros/antracita para los marcadores de daño/calaveras.
---------------------------------------------
Upgrade your War of the Ring: The Card Game experience with this complete 3D printable accessory kit!
This design features ergonomic player card trays and snap-fit protective token capsules for all cardboard tokens, improving table organization, card handling, and component protection.
✨ What's included?
Player Card Trays / Holders:
Holds draw deck, discard pile, and active/played cards.
Angled side slots to keep cards upright and visible, saving valuable table space.
Fully compatible with premium sleeved cards.
Material-saving design with easy-grab bottom cutouts.
Token Capsule Sleeves (Snap-Fit):
Dual-color combat token rims: Print in two colors (Blue & Red) to match opposing sides.
Ring & Special Marker Sleeves: Perfectly fitted to cardboard tokens.
Rectangular token frame: Optional dual-color print (Free Peoples / Shadow).
Damage / Skull token holders: Clean border finish in dark/charcoal PLA.
Snug fit that protects token edges from wear while adding satisfying tactile weight.
⚙️ Print Settings
Material: PLA / PETG
Layer Height: 0.20 mm (Trays) | 0.12 – 0.16 mm (Token Capsules)
Perimeters/Walls: 2–3
Infill: 15% – 20%
Supports: None required (100% support-free print)
Recommended Filament Colors: Red, Blue, Grey/Black, White/Gold.
