Rococo Boardgame Inserts

These are files for inserts for the boardgame Rococo by Matthias Cramer, Louis Malz and Stefan Malz from the companies eggertspiele and Eagle Games.

The inserts are for the 1st edition game and include space for the Jewelry box expansion for the game.

Alle cards are sleeved using Arcane Tinmen sleeves size Medium (57 x 89mm) non glare (Those from a greed cardboard box.)

I don't know if the inserts are usable with the second edition deluxe edtion of the game.

You will need to print three of the normal sized chest and one for the larger one. You can see on the photos what goes where.

NOTE: The drawers are a tight fit and depending on what filament, printer and slicers and what not please expect to use a little 1000 grid sandpaper on the outer sides of the drawers. It won't be much but I had to do a little to ensure the drawers don't slide out of the chest for nothing and yet enough to come out without force.

You are welcome to copy and modify to your hearts content as long as you mention me in your version.

Thank you in advance.

UPDATE!

I've come full circle on this project now. I started out being heavily inspired by Carvac's Snap-Close Jewelry Box https://www.printables.com/model/762998-snap-close-jewelry-box until I found it would take up too much air in the box and I wanted to do something entirely different hence the rococo furniture. After finishing those I still had the finished bottom and the bag with dresses but no lid and instead of letting the bottom go to waste and to honour the efforts MangoJelly had put into hinting me through the process, I finished the lid. Its without a snap function but tight enough to stay in place upside down with the bag and dresses inside.

A huge thank you to MangoJelly for guidiance and to all those helping souls over at FreeCAD Forum.

Also a huge thanks to papyblaise for that outstanding Fleur du lis.

NOTE: I managed to reduce the size of RokokoDresses.FCStd substantially.

Best Regards

Peter Rasch Lageri

Denmark