Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Bone to Pick board game insert
Inserts
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
✓ Covers Bone to Pick: Rise of the Necromancers
✓ Fits sleeved cards
✓ Fits premium sleeves
About 276 g of filament
Print Profile 6h 2m 276 g PLA
What it takes
1 plate
6h 2m
276 g PLA
P1S, P2S, H2S, H2C, X2D, H2D, A2L, X1 Carbon, H2D Pro, X1, A1, X1E, P1P
• No supports needed
• Add filament change on layer 8 (to white) and layer 10 (to black) to achieve the white lettering (provided layer height of 0.16)
• Recommend to add Brim Ears as it is a big rectangular object
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
6h 2m
276 g
PLA · 257 g
PLA · 19 g
Designer's Description
Simple insert for the board game Bone to Pick .
Allows storage for all pieces, including the “ Rise of the Necromancers ” expansion.
All cards fit easy fully sleeved in Dragon Shield Clear Classics .
Unsleeved cards would have a bit more wiggle room.
All six card slots are labeled. The white text is achieved with a layer change (prime tower disabled).
Note:
- The tolerance in the box is a bit big, there is a about 2mm gap on both sides.
- The sleeved cards are little tricky to get out without small fingers
Neither of these two things were important enough for me to reprint it. If you care a lot I recommend adjusting the file, make the box sides 2mm longer and increase the round holes all the way to the edge. Maybe even add more slits horizontally, between the three chambers.
Autodesk Fusion 360 file is provided for easy remixing.
/pic7264997.png)