Dungeon Pages storage bin

Very simple open storage bin for Dungeon Pages print and play game. It should fit all currently published Dungeon Pages content if I have estimated correctly (as of Sep 14, 2025). I currently have the core set and Overland adventures with maps and characters laminated separately front and back. Interior measurements are approximately 180 x 66 x 140mm.

The cutout does not show up in the model images because did this in Cura.
I added the gcode file in case you want to use it. You will need to use 0% infill.
I can add the exact slicer settings later - I don't have time at the moment. Just make sure to use a 0.4 nozzle if you use the gcode file. The temp is set to 220 for the first 2 layers, and 210 after that. Speed is 30mm/s for the first 2 layers, and 180mm/s after that. It took 6.5 hrs to print on my Ender 3 V3 SE using these settings; Cura astimated 7hrs.

I used a 0.4mm nozzle, but you could probably print with 0.8mm to print faster. I also printed with enough layers so that the bottom is 3mm thick. This might not be necessary - I did this to help it not tip over, but it seems wide enough to be pretty stable without having to do this.

Original model made using https://deckinabox.sgenoud.com/
Cutout added in Cura
You can add text (and more) at https://blingmything.sgenoud.com/

Printer: Ender 3 V3 SE
Rafts: No
Supports: No
Resolution: .2
Infill: 0%
Filament brand: Polymaker
Filament color: Dark Blue
Filament material: PLA