Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

Corps of Discovery Map Board and Path Tokens

Plan Your Print
About 271 g of filament From the designer's print profile
Print Profile (3) 0.2mm layer, 2 walls, 15% infill 6h 43m 271 g PLA
0.2mm layer, 2 walls, 15% infill
4 plates 6h 43m 271 g PLA
P1S, X1 Carbon, H2D, X1, X1E, H2S, H2D Pro, P1P, A1, P2S, H2C, X2D, A2L
Plate Details (4)
0.4 mm nozzle, all plates
Plate 1 · Top Left
1h 33m 49 g PLA · 49 g
Plate 2 · Bottom Left - Top Right
1h 34m 71 g PLA · 71 g
Plate 3 · Bottom Right
1h 30m 86 g PLA · 86 g
Plate 4 · Path Tokens
2h 6m 65 g PLA · 65 g
0.2mm layer, 2 walls, 15% infill (requires AMS)
4 plates 8h 3m 289 g PLA
P1S, X1, P1P, A1, H2D Pro, H2S, X1E, X1 Carbon, H2D, P2S, H2C, X2D, A2L
Multi-color version, requiring an AMS (although the board itself could probably printed fairly easily by pausing the print and swapping filaments).
Plate Details (4)
0.4 mm nozzle, all plates
Plate 1 · Bottom Right
1h 30m 86 g PLA · 86 g
Plate 2 · Top Left (AMS)
1h 45m 53 g PLA · 51 g PLA · 2 g
Plate 3 · Top Right (AMS) - Bottom Left
1h 46m 75 g PLA · 73 g PLA · 2 g
Plate 4
3h 2m 75 g PLA · 2 g PLA · 36 g PLA · 6 g PLA · 31 g
0.2mm layer, 2 walls, 15% infill (Large Bed w/AMS)
3 plates 7h 40m 282 g PLA
H2S, H2D, H2D Pro
For large bed printers that can print the top/bottom as a single piece.
Plate Details (3)
0.4 mm nozzle, all plates
Plate 1 · Top (AMS)
2h 15m 74 g PLA · 72 g PLA · 2 g
Plate 2 · Bottom
2h 14m 134 g PLA · 134 g
Plate 3 · Path Tokens (AMS)
3h 12m 74 g PLA · 2 g PLA · 36 g PLA · 7 g PLA · 29 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description

This print includes an alternate Map Board and Path Tokens for the Corps of Discovery board game. The original map board included with game suffers from a number of issues. I found inserting the map and the coversheet into the board annoyingly awkward and difficult. Removing coversheet (while leaving the map in place) was equally cumbersome. My design tries to address these issues.

The Map Board includes an upper lip that helps guide the map and cover sheets into the opening of the board and notch in the back of the board (allowing you to hold down the map sheet with your finger) to make removing the cover sheet (a little) easier.

Because the board is larger than the size of my printer's build plate, it is made up of sections that snap together. These fit together quite well and glue should not be necessary and I've had no issues with the parts coming apart accidentally.

corps of discovery