Batman the Animated Series - Shadow of the Bat - Dice Matching Shared Action Tokens

Inspiration taken from:
https://boardgamegeek.com/filepage/232054/btas-sotb-dice-matching-shared-action-tokens

These are scaled to match Scrabble Tiles, I should have scaled them to the dimensions of the dice instead. If you print these, you should scale them for your use but Scrabble tiles don't fit in the dashboards, dice do.

(Basically) From the link above:
Here are my shared dice tokens to replace the community pool of shared neon/pastel tokens. Each hero will now have their own matching set to be handed out to players to keep things visually organized- and easier to pickup too.

Included are single extruder tokens and MMU tokens.

Note: I was about 1/2 done printing these when I realized they just barely don't fit in the hero boards from the Kickstarter, If that's a deal-breaker, you can try scaling the tokens.

---Single Extruder---
Shared Tokens - Single - XXXXXX.3MF: Single extruder tokens that don't have corresponding "inset" files and a shallower (.4mm) cavity that should be usable via layer color change.

I expect that if you plan to print them face up, you will need a .25mm nozzle to get any decent icon fidelity.

---Multi Material--- (these tokens have a deeper 2mm cavity and should only be used with the 'inset' components)
Shared Tokens - MMU - XXXXXX.3MF: Individual tokens in .3MF format,

Shared Token - MMU - XXXXXX.STL / Shared Token - MMU - XXXXXX - Inset.STL: Tokens and their matched inset components split into seperate STL files

Shared Tokens Project - YYYYYY.3MF: Preconfigured .3MF files that you can import directly into PrusSlicer for your MMU with a brim on each token and a purge block with a little extra purge for filaments 1 and 2. The .3MF files for Villains are assuming you have the extra dice, if not, you'll want to reduce each token count by half.

These files are setup for a Mk2.5s with MMU2s, make sure you adjust your settings to match your printer.

I printed the MMU tokens on their bottom edge at .15mm resolution, thin wall detection is a must.

The "Bat" tokens and "Wild" tokens don't have a use but I was on a roll when making tokens from the user manual so I made them anyway. Get creative.

The trays are part of an organizer that I will be releasing very soon, just have a little more work to do before publishing.

Token Counts:
Batman/Bruce Wayne: 2 - Move | 2 - Melee x2 | 2 - Ranged x2 | 2 - Defend | 2 - Defend/Melee
Batgirl: 4 - Move | 2 - Melee x2 | 2 - Ranged | 2 - Defend
Robin: 4 - Move | 2 - Melee | 2 - Ranged x2 | 2 - Defend
Nightwing:4 - Move | 2 - Melee x2 | 2 - Ranged x2 | 2 - Defend
Robin (Tim Drake): 2 - Move | 2 - Move x2 | 2 - Melee | 2 - Ranged x2 | 2 - Defend/Melee
Renee Montoya: 2 - Move x2 | 2 - Melee | 2 - Ranged | 2 - Defend | 2 - Defend/Ranged
Etrigan: 2 - Move | 2 - Melee x2 | 2 - Ranged x2 | 2 - Defend/Melee | 2 - Defend/Ranged
Grey Ghost: 2 - Move | 2 - Melee | 2 - Ranged | 2 - Defend/Melee | 2 - Defend/Ranged
Batwoman: 2 - Move | 2 - Melee | 2 - Melee x2 | 2 - Ranged | 2 - Defend/Move
Catwoman: 4 - Move | 2 - Move x2 | 4 - Defend/Melee
Phantasm: 2 - Move | 2 - Melee x2 | 2 - Ranged x2 | 4 - Defend
Jim Gordon: 2 - Move | 2 - Melee | 2 - Ranged x2 | 2 - Defend | 2 - Defend/Ranged
Harvey Bullock: 2 - Move | 2 - Melee | 2 - Ranged x2 | 2 - Defend | 2 - Defend/Melee
Supergirl: 3 - Move x2 | 3 - Melee x2 | 3 - Ranged x2 | 3 - Defend/Melee
Zatanna: 3 - Move | 3 - Melee | 3 - Ranged | 3 - Defend/Move

Villains (Double if you have the extra dice pack)
Brawler (Red/Yellow): 2 - Move | 2 - Melee | 2 - Melee x2 | 2 - Ranged | 2 - Defend
Bruiser (Blue/White): 2 - Move | 2 - Melee | 2 - Ranged | 4 - Defend/Melee
Assassin (Green/Black): 2 - Move | 2 - Melee | 2 - Ranged | 2 - Ranged x2 | 2 - Defend
Wild Card (Purple/Green): 2 - Move x2 | 2 - Melee | 2 - Ranged | 2 - Defend/Melee