LayerUp Stats 5

Add Oct 26, 26 Sync Oct 26, 26

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

Carcassonne Travel Box — Custom organizer

for Carcassonne (2000) Lift the Lid

thiz3D

Inserts Free

View on MakerWorld 6 2 Added Oct 3, 26 | Updated Oct 21, 26 Support thiz3D by Liking and Boosting their model.

Plan Your Print

✓ Optional multicolor profile

About 274 g of filament

Print Profile (3) 0. Snap-on latch - prints separately ! 13m 3 g PLA

0. Snap-on latch - prints separately !

1 plate 13m 3 g PLA

P2S, P1S, H2D Pro, H2S, X1 Carbon, P1P, X1E, A1 mini, H2C, A1, X2D, H2D, X1, A2L

This latch is easily installed, be it with a piece of filament, some even used a toothpick. To avoid the filament to move once in place, I either add a drop of glue or slightly melt 1 extremity before pulling it in.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1 · Comfort version (base minimum 14mm height)

13m 3 g PLA · 3 g

Parametric box - hit "Customize" to make you own

5 plates 7h 48m 274 g PLA

P2S, H2S, A2L, H2D, A1, H2D Pro, H2C, X2D

## 🛠️ Customize your organizer Start with your tiles: 45 × 45 × 2.1 mm . For comfortable handling, give tile compartments at least 48 × 48 mm of clear space . Choose 49–50 mm if you prefer a little extra room. 📐 Build your layout with commas Enter compartment widths and lengths as comma-separated numbers: • Widths: 49,49,49 → three columns. • Lengths: 52,52 → two rows. • Together, they create six compartments . These are usable internal dimensions; the model adds the walls separately. Use a decimal point for fractions: 32.6 , not 32,6. 🧩 Give the removable tray its own layout Use fixed dimensions or let the model share the available space: • equal,equal → two equal spaces. • 48,rest → one 48 mm space, plus the remainder. • 48,equal,equal → one 48 mm space, with the remainder divided equally. Always check that tray compartments intended for tiles remain at least 48 mm in both directions . 👆 Push-out holes are recommended for tile stacks An 18 mm bottom hole is a useful starting point: lift the box and push the stack up from underneath. Enter hole sizes in compartment order, top-left to bottom-right . For example, 18,18,18,18,-,- adds holes to the first four compartments and leaves the last two closed. Keep small-piece compartments closed so your meeples don’t discover an escape route! 🏷️ Labels follow the same order Separate labels with commas. Use _ for a new line and - to skip a compartment. After changing your layout, update the labels and hole lists to match. 📏 Remember the height Tile-stack height is approximately tile count × 2.1 mm , plus handling clearance. The tray and stored scoreboard also need room: the model reserves 4.5 mm for the two scoreboard halves, a 1 mm separator and a little spare clearance. 📖 Download the customization guide for detailed explanations, worked examples and a final pre-print checklist.

Plate Details (5)

0.4 mm nozzle, all plates

Plate 1 · Plate 1

3h 19m 144 g PLA · 142 g PLA · 2 g

Plate 2 · Plate 2

1h 27m 56 g PLA · 56 g

Plate 3 · Plate 3

1h 26m 36 g PLA · 27 g PLA · 3 g PLA · 4 g PLA · 2 g

Plate 4 · Plate 4

1h 25m 36 g PLA · 27 g PLA · 3 g PLA · 4 g PLA · 2 g

Plate 5 · Plate 5

10m 2 g PLA · 2 g

Standard travel box, ready to print (AMS for scoreboard)

3 plates 5h 27m 224 g PLA

P2S, H2S, H2D, A2L, H2D Pro, A1, H2C, X2D

This all-in package includes • The travel box (AMS recommended for lid text, also works without) • The meeples & extension tray • The 2-pcs score board (AMS only, look for the non-AMS scoreboard on the main page) • The tiles separator (to re-use the base as tiles shuffle box)

Plate Details (3)

0.4 mm nozzle, all plates

Plate 1 · Box & lid

3h 18m 144 g PLA · 142 g PLA · 2 g

Plate 2 · Inlay & latches

1h 37m 61 g PLA · 61 g

Plate 3 · TILES SEPARATOR (optional - create shuffle box)

32m 19 g PLA · 19 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

🏰 Your tiles. Your meeples. Your extensions. Your layout.

Less rummaging. More kingdom building. Keep your collection together in a fully customizable organizer—with a scoring board that packs inside the box.

📦 One box, adapting to your needs

Configurable compartments - organize tiles and expansion pieces.
A removable tray - keeps meeples and accessories within reach.
A 50-point scoreboard loop - stores inside the box and joins with removable bow-tie connectors.
Corner finger cutouts - make the scoreboard plates easy to lift out.

Add a separator beneath the tray to turn the emptied upper space into a tile-drawing area.

🛠️ Fully customizable, inside and out

Shape the organizer around your collection and your way of playing :

Compartment widths, lengths and box height.
Tray divisions, depth and labels.
Lid text, emojis, fonts and colors.
Hinge and closure options.
Optional push-out holes.

The scoreboard follows the box’s internal dimensions automatically. Its artwork scales without stretching, and the automatic orientation chooses whichever direction makes it largest.

🖨️ Before you print

Check every generated plate against your printer’s build area. Compact configurations can suit an A1 mini ; larger layouts need a larger bed.

Smaller boxes also mean smaller scoring spaces, so check your meeples against the preview. The separator is a separate piece—match it to your chosen box dimensions.

🏷️ Tags

Carcassonne, board game, board game organizer, board game insert, board game storage, tabletop gaming, tile storage, tile dispenser, tile tray, meeple, meeple organizer, scoreboard, score tracker, scoring track, game accessories, expansion storage, parametric, customizable, fully customizable, OpenSCAD, MakerWorld, AMS, multicolor, Bambu Lab, A1 mini, P2S, removable tray, compartment box, bow tie connector, game night, travel board games

carcassonne custom customize customizable personalize personal parametric board game storage meeples tiles