Targi - additional meeples for 3-4 players variant

Did you know the Targi game designer published an official variant to play the game with 3 or 4 players instead of just 2? All it takes is a custom border card you can print and 2 sets of meeple figures… which you can get right here and they match 100% the original ones!

I went with the black and red colors which should have been used historically by the tuareg people and are distinct enough from the others, also when accounting for certain types of color blindness, but you can print these in any colors you want.

Note: I have attached to this page a copy of the official variant rules for your convenience: credits go to the author of the game.

The profile I am supplying is for 0.08 layer height which will produce a very high quality meeple that will match the originals for shape and smoothness. I even checked on a weight scale if the weight is approximately the same!

If you don't want to print at such definition, you can certainly reduce to 0.20 or 0.24 even.

As another alternative yet, you could switch to Bambu Wood PLA, use a 0.6mm nozzle and then paint the meeples for a more seamless effect with the originals in wood.

The profile I am supplying uses a minimal amount of supports easy to remove: the reason for this choice is to guarantee that the front and the back of the meeple will print the same. If you have a smooth PEI plate perhaps you can just lay down the meeples and you won't notice, but I think if you want to achieve the best result, printing upright is my recommendation.

These meeples will fit my Targi organizer ! No need to change anything!