Marvel Zombies Magnetic Insert

This is an insert for the board game Marvel Zombies by CMON. The goal of this design was to accommodate using magnetic bases on all of the minis (except the sentinels / giant man) to allow for a faster setup and use during the game. I used the round adhesive bases from Green Stuff World to make it easy to attach to every mini. I used their rubber steel sheets cut to the sizes of the 10 main boxes plus 3 small boxes. I used magnets for attaching each of the box lids. There's 3 main boxes for the super heroes and 2 main boxes for the zombie heroes each with a small spillover to one other that allows all to be alphabetized to be quickly found. I used photos to attach to the lids to help quickly find / return minis. Most minis when setup right will and game boxes stored vertically will be standing upright. I've found that with my Kallax all 3 boxes despite some lift can fit in one cube with a little gap out the back.

This accounts for the full “Hungry Pledge” in my copy including acrylic tiles, artist box, and sleeved cards. I expect that it should also be able to fit the cards and the silver surfer from the all in. I'm not sure about fitting the extra unique minis from the mass market version of the game but probably with some shifting it should be possible as well.

Part of this design came from a previous work:
https://www.printables.com/model/694706-marvel-zombies-insert
Which was the card trays, the tall bunks, and the tokens holder.

The magnets for the lids are 10x2. I used these:
https://www.amazon.com/gp/product/B0753ZPBLQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Be sure to use the right polarity (I used a magnet tool) between the box and the lid. I used one drop of super glue before pressing in just to make sure they all stayed well.

The non-hero minis all use these round bases:
https://www.greenstuffworld.com/en/magnetic-foil-stickers/1603-round-magnetic-sheet-self-adhesive-25mm.html
The hero (super / zombie) all use these:
https://www.greenstuffworld.com/en/magnetic-foil-stickers/1604-round-magnetic-sheet-self-adhesive-30mm.html
The plates for the bottom of the boxes are these (though I bet alternatives could be found):
https://www.greenstuffworld.com/en/magnetic-sheets/75-steel-rubber-sheet-for-magnetic-trays-and-crafts.html

I found that the color player rings weren't good with the minis and I found that plastic bases inserted into them with an attached steel plate made for a nice functionality.
https://www.amazon.com/gp/product/B0823FLL2C/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B08R2X2MCF/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

The 3mf file has everything setup to print except for the dividers which I left one in, but you'd need to decide how many to print. I used different colors for my dividers per game mode and had extra discard dividers so that everything can play out of the boxes. I have attached the label files I used as well printed to adhesive paper and cut out.

Supports against the model are used for all the storage boxes with lids to support the magnet overhangs. Tree supports with .2 layer height is how I printed everything.

If going by the individual STL files:
Box A x5

Box B x3
Box ABC Lid x10
Hydra Box x2
Tall Bunk x2
Mini Card x2
Hero Card x2
Dividers (optional)
Everything else x1