Snow Planner(basegame+expansions) Insert

https://makerworld.com/models/1792362
 
This text is machine translation.
 
##### ※Note: This is not for the BigBox. This insert is designed to store the standard base game, New Season, and New Challenge. It is not compatible with the special dice, wooden token pieces, double-layer board, or acrylic stand.
 
This model can store **all components** and **sleeved cards** used in the base game, New Season, and New Challenge. **Replacement cards/language variant cards/old project cards are not used and cannot be stored.**
Due to space constraints, unfortunately, the resource tray could not be split into two. Depending on the number of players, it may be better to prepare a separate tray.
When everything is stored inside, the lid will lift up about 1 cm.

Uses the following sleeves (soft):
- 65x90
- 46x65

`card_guest+project x1.stl` - The wider section holds Guest Cards, while the other side holds Project Cards, Round Cards, Open Guest Cards, and VIP Cards. The narrower section is for special talent cards: Lodger Cards and Artisan Token Exchange Cards.
`card_new_challenge x1.stl` - Stores all cards for cooperative mode together (the cooperative mode icon is visible through the side hole).
`card_other x1.stl` - Stores all cards except event cards. The side hole is sized to align when placed with the goal card facing down.
 
#### Printing Instructions
Print `player_setup x4.stl` four times, `tray_window x2.stl` twice, and the others once. `choose_board.stl` is provided in both a standard version and a split version for small printers. Select the appropriate one for your printer.
 
 
* * *
### Japanese Ver
 
##### Note: This is not for BigBox. This insert is for storing the standard base game, new season, and new challenge. Special dice, wooden token tokens, double-layer boards, and acrylic stands are also not supported.
 
　This model can store **all components** and **sleeve cards** used in the standard base game, new season, and new challenges. **Replacement cards, non-language cards, and old project cards cannot be stored. **
　Due to space constraints, unfortunately, we couldn't split the resource tray into two. Depending on the number of players, it's better to have a separate tray.
　When everything is stored, the lid lifts about 1 cm.

Use the following sleeves (soft):
- 65x90
- 46x65

'card_guest+project x1.stl' - The wider one contains guest cards, while the other contains project cards, round cards, open guest cards, and VIP cards. The narrow slots are for special talent guest cards and master token exchange cards.
'card_new_challenge x1.stl' - Store all co-op mode cards together here (you can see the co-op mode icon through the side hole).
'card_other x1.stl' - Stores all cards except event cards. The side holes are set to the same height as the goal cards facing back.
 
#### Printing Methods
Print 'player_setup x4.stl' four times, 'tray_window x2.stl' twice, and others once. 'choose_board.stl' is available in both standard and split versions for compact printers. Choose according to the printer you will use.