Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Arcana Rising - Casting Board
Boards & Maps
Free
Designer's Description
How to Print
- Print without supports.
- Multi toolhead printer is highly desirable to reduce purge waste between colour swaps.
- Optimized for 0.16mm layer height unless stated otherwise.
- Optimized for 0.4mm nozzle unless stated otherwise.
Casting Board 1 of 2
- Print 1.
- I printed at 0.16mm layer height.
- Using the .3mf file, the objects should be already coloured as required.
- Alternatively, change colours at the following layer heights (using 0.16mm layer height):
- Layer 1 / default filament - black
- Layer 20 - change to red
- Layer 21 - change to black
- Layer 23 - change to white
Casting Board 2 of 2
- Print 1.
- I printed at 0.16mm layer height.
- Using the .3mf file, the objects should be already coloured as required.
- Alternatively, change colours at the following layer heights (using 0.16mm layer height):
- Layer 1 / default filament - black
- Layer 23 - change to white
Connectors
- Print 3 (or use the .3mf which has 3)
- These are small, you may need a brim.
Print settings:
- Print with 0.16 layer height
- (Optional) Use brim for connectors - not required with BIQU CryoGrip Pro plate.
Fits in the box nicely with this organiser:
