Europa Universalis – Slide-In Army sheet Frame

for Europa Universalis: The Price of Power (2023) Lift the Lid

sliver_raccoon

Board Frames & Overlays Free

View on MakerWorld Added Nov 3, 26 Support sliver_raccoon by Liking and Boosting their model.

Plan Your Print

About 132 g of filament

Print Profile 5h 17m 132 g PLA

What it takes

12 plates 5h 17m 132 g PLA

P1S, H2D, P2S, H2C, H2S, X1E, X1 Carbon, A1, P1P, X1, X2D, H2D Pro, A1 mini, A2L

• Material: PLA • Nozzle: 0.4 mm • Base layer height: 0.20 mm • Walls: 3 • Infill: 15% grid • Supports and brim: Not required Estimated printing time is approximately 32 minutes and 10.15 g per frame , or 6 hours 23 minutes and 121.8 g for all 12 frames . Use the orientation and settings saved in the 3MF. Print one frame first, allow it to cool, and check the sliding fit before printing the remaining frames. Insert the sheet gently without forcing it. The saved profiles have been checked in the slicer. Fit may vary with sheet thickness and printer tolerances.

Plate Details (12)

0.4 mm nozzle, all plates

Plate 1

26m 11 g PLA · 11 g

Plate 2

26m 11 g PLA · 11 g

Plate 3

26m 11 g PLA · 11 g

Plate 4

26m 11 g PLA · 11 g

Plate 5

26m 11 g PLA · 11 g

Plate 6

26m 11 g PLA · 11 g

Plate 7

26m 11 g PLA · 11 g

Plate 8

26m 11 g PLA · 11 g

Plate 9

26m 11 g PLA · 11 g

Plate 10

26m 11 g PLA · 11 g

Plate 11

26m 11 g PLA · 11 g

Plate 12

26m 11 g PLA · 11 g

Designer's Description

Upgrade your Europa Universalis: The Price of Power Army/Fleet Mats with a lightweight, slide-in frame.

Simply slide your existing game sheet into the frame through the open edge. The frame holds the original sheet in place while leaving its printed information visible, so you can keep using your existing components without reprinting the artwork.

Raised dividers outline the six unit areas, helping keep pieces separated and making your army and fleet organization easier to read during play.

europa universalis 4 eutpop slide in frame