LayerUp Stats 16

Add Jul 2, 26 Sync Aug 6, 26

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

P´IKAUP Card Lifter

for Miscellaneous Game Accessory Layer by Layer

Pika106

Card & Tile Holders Free

View on MakerWorld 51 115 Added Nov 21, 25 | Updated Aug 5, 26 Support Pika106 by Liking and Boosting their model.

Plan Your Print

About 25 g of filament From the designer's print profile

Print Profile (6) Complete in PLA 1h 30m 25 g PETG

Complete in PLA

1 plate 1h 30m 25 g PETG

A1 mini, X1E, H2C, X2D, H2D, P1P, H2S, P2S, P1S, A2L, H2D Pro, A1, X1, X1 Carbon

PLA mit Baumstützen

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

1h 30m 25 g PETG · 25 g

Complete in PETG

1 plate 1h 30m 25 g PETG

A1 mini, X1E, X1 Carbon, H2S, A1, A2L, X2D, P1S, X1, H2C, P1P, H2D, H2D Pro, P2S

PETG mit Baumstützen

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

1h 30m 25 g PETG · 25 g

PLA Dual Color Body

1 plate 1h 3m 20 g PLA

A1 mini, P1S, X1 Carbon, A1, H2D, H2D Pro, X1, A2L, P1P, H2C, X2D, X1E, P2S, H2S

Body Dual Color in PLA

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

1h 3m 20 g PLA · 14 g PLA · 6 g

PLA Black Parts

1 plate 44m 11 g PLA

A1 mini, X2D, P1P, X1, H2D, P1S, H2D Pro, H2C, X1 Carbon, A1, X1E, H2S, A2L, P2S

Black Parts in PLA

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

44m 11 g PLA · 11 g

PETG Black Parts

1 plate 1h 2m 11 g PETG

A1 mini, P1S, H2C, A1, X2D, X1 Carbon, H2S, H2D Pro, A2L, P1P, H2D, X1, X1E, P2S

Black Parts in PETG

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

1h 2m 11 g PETG · 11 g

PETG Body DualColor

1 plate 1h 11m 20 g PETG

A1 mini, H2D Pro, H2C, H2D, H2S, X2D, P2S, X1 Carbon, A1, A2L, X1, P1P, P1S, X1E

Body Dual Color in PETG

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

1h 11m 20 g PETG · 14 g PETG · 6 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

When I saw the advertisement for the Card Lifter on social media, I knew immediately: I need it!
But the models that were available online seemed either impractical or too clunky.

That's why I decided to develop my own design – closer to the original, functional and compact at the same time.

🔧 Required additional parts

Suction cups – available e.g. here at Amazon
Spring – ideally in the size 0.45 × 5 × 15 mm here at Amazon

🎨 Print Profiles

Suitable for PLA and PETG
Variants: Single color or body with color change effect

This model combines practicality with a sleek design and brings back the fun of tinkering and experimenting.

Assembly:

A hole of about 2.5mm in size must be drilled into the suction cup (be sure to drill, otherwise the hole is not big enough or will close again)
Then insert the suction cup into the holder
Insert the spring into the groove on the top of the body
Insert the inner body into the body with the suction cup
Screw the lid on at the top as far as it will go (not too tight!)
Have fun :)

Scratchplate3D has designed a really nice box for this card lifter and uploaded it here on Makerworld: https://makerworld.com/de/models/2488556-snaplock-storage-box-for-p-ikaup-card-lifter#profileId-2734300

… that's a really nice addition to this :) Have fun with it!

Translated from German - show original

Als ich die Werbung für den Card Lifter auf Social Media gesehen habe, wusste ich sofort: den brauche ich!
Doch die Modelle, die online verfügbar waren, wirkten entweder unpraktisch oder zu klobig.

Deshalb habe ich mich entschieden, ein eigenes Design zu entwickeln – näher am Original, funktional und zugleich kompakt.

🔧 Benötigte Zusatzteile

Saugnäpfe – erhältlich z. B. hier bei Amazon
Feder – idealerweise in der Größe 0,45 × 5 × 15 mm hier bei Amazon

🎨 Druckprofile

Geeignet für PLA und PETG
Varianten: Single Color oder Body mit Colorchange-Effekt

Dieses Modell verbindet Praktikabilität mit einem schlanken Design und bringt den Spaß am Basteln und Ausprobieren zurück.

Zusammenbau:

in den Saugnapft muss ein ca 2,5mm großes Loch gebohrt werden (unbedingt Bohren, sonst ist das Loch nicht groß genug oder verschließt sich wieder)
den Saugnapf dann in den Halter Stecken
oben in die Nut am Body die Feder einsetzen
den Innenkörper mit dem Saugnapf in den Body einschieben
den Deckel oben bis zum Anschlag aufschrauben (nicht zu fest!)
Spaß haben :)

Scratchplate3D hat eine richtig schöne Box für diesen Kartenheber designt und hier auf Makerworld hochgeladen: https://makerworld.com/de/models/2488556-snaplock-storage-box-for-p-ikaup-card-lifter#profileId-2734300

…das ist eine richtig schöne Ergänzung hierzu :) Viel Spaß damit!

pkup cardlifter kartenheber spielkarte playingcards

Miscellaneous Game Accessory Layer by Layer

Cover Colors

Main colors from the cover art. Find matching filament, or tap swatches to narrow.

Submitted via BGG Geeklist

Dec 10, 2025 by JimmyTrinket

for Miscellaneous Game Accessory

This is something I've always wanted to get but the shipping is crazy at the moment. Then this Pikaup Card thing popped up on Makerworld and it is brilliant. I just had the chance to print one and it works like a charm.