Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Ark Nova Deluxe Player Board Overlay (Clear&Slim)
Player Dashboards
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 34 g of filament
From the designer's print profile
Print Profile 7h 23m 34 g PETG
What it takes
3 plates
7h 23m
34 g PETG
P1S, P1P, X1, X1 Carbon, X1E
Plate Details (3)
0.4 mm nozzle, all plates
Plate 1 · left
2h 56m
14 g
PETG · 14 g
Plate 2 · right
4h 9m
19 g
PETG · 19 g
Plate 3 · Test Square
18m
1 g
PETG · 1 g
Designer's Description
This is an improved version of the Ark Nova player board overlay made by Shadrack . Important improvements I made:
- The original model size was smaller than the map and lacked a full-length guard at the bottom (only four points of support, which damages the map). I added the bottom guard and readjusted the dimension s.
- The original model has detailed cutouts of the rewards section on the left, but it only fits some maps (i.e. Map A, Map 0). I decided to cut the whole area to fit all map designs .
- I then had the idea to just make it transparent with clear PETG, because I love to see the artworks on the map (also there are special rules all over the newer maps). I borrowed the print profile of Adam L and used overture clear PETG.
- I reduced the thickness from 3 mm to 1.5 mm. The slim overlay allows the map to fit more snugly, improves PETG transparency, and makes it easier to remove pieces and store the board in the box.
Some recommendations: I used a heat gun to remove the stringing, which is hard to avoid for a high temperature PETG print profile. Make sure the head gun is not set too hot!
Other Ark Nova improved models: Insert , animal coins .
/pic9577170.png)
