Dahan — Spirit Island Hut Token (2-Colour)

Replacement tokens for the dahan (Pacific-Islander villagers) in Spirit Island . Stylised as miniature tribal huts so each one reads at a glance as a village, not a wooden cube.

The hut is split into a roof half and a body half for 2-colour printing on a Bambu AMS.

• dahan_combined.stl (~27 MB) — 2 named solids (dahan_roof + dahan_body) in one ASCII STL. Bambu workflow: Import → right-click → Split to Parts → assign one filament per part. Coordinates locked, no manual alignment.
• dahan_body.stl (~1.9 MB) — woven body half only, binary STL. Use this for a single-colour print, or for AMS users who want to assign filaments per-file instead of via Split-to-Parts.
• dahan_roof.stl (~2.9 MB) — conical thatched roof half only, binary STL. Mates with the body at z = 8.25 mm.

• Overall: Ø22 mm × 20 mm tall
• Roof / body seam at z ≈ 8.25 mm (vertex-histogram peak — the eave where roof meets wall)
• Each hut: ~6 g PLA at standard settings

• Orientation: flat on bed — the token sits upright with the body's flat bottom on the build plate.
• Supports: none.
• Layers: 0.2 mm.
• Walls: 3.
• Infill: 15 %.
• Filament: ~6 g per hut.
• Print time: ~25 min per hut.

The bundle ships 6 huts on the print bed (one for every dahan slot on the standard Spirit Island board / per-spirit setup). Tile them in Bambu Studio if you want fewer / more.

• Import dahan_combined.stl.
• Right-click the model → Split to Parts . You will see two parts named dahan_roof and dahan_body.
• Assign filament 1 (e.g. thatch tan ) to dahan_roof, filament 2 (e.g. wall brown ) to dahan_body.
• Slice + print.

The seam at z = 8.25 mm is the natural eave line — the colour change lands exactly where the wall meets the overhang of the roof, so it reads as architecture, not as a slicer artefact.

• No AMS? Print dahan_body.stl and dahan_roof.stl separately, then glue them at the seam. Or just print the body for a silhouette-only token.
• Single-colour MMU users: drop dahan_combined.stl in as a multi-material model directly without Split-to-Parts.
• Backup: the combined ASCII is ~5× larger than the binary halves — if your slicer balks at the size, the halves are the same mesh in a leaner format.

• Designed for Spirit Island (any edition).
• The token's footprint fits the dahan slots on the board with margin to spare; multiple huts cluster cleanly inside a single land.
• Pairs nicely with my other Spirit Island prints (beast / fist / paw / mountain / wilds tokens + energy_counter + colonizer) — all in the same chibi visual language.