Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

Gloomhaven/Jaws of the Lion Initiative Tracker

Plan Your Print
Optional multicolor profile The designer also offers a multicolor way to print this (an MMU/AMS profile or per-color parts)
About 293 g of filament From the designer's print profile
Print Profile (2) 0.2mm layer, 2 walls, 15% infill; Filament Swap for 6 colors 7h 39m 293 g PLA
0.2mm layer, 2 walls, 15% infill; Filament Swap for 6 colors
1 plate 7h 39m 293 g PLA
A1, X1, H2C, H2S, P2S, P1P, X1E, X1 Carbon, H2D Pro, P1S, H2D, X2D, A2L
## About this model I lose track of initiatives as they are being called out, and wanted to design a solution. I brainstormed a few options, and settled on a stairstep board with each number. The initiative tokens fit in each slot, so they can be marked as the initiatives are called. ## Heatmap Steps I have an A1 with AMS lite, so I painted the orange dark green and the red light green, then swapped the filament while it worked on the yellow steps. ## No Prime Tower? I printed it with no prime tower with no problem.
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
7h 39m 293 g PLA · 268 g PLA · 6 g PLA · 5 g PLA · 4 g PLA · 5 g PLA · 5 g
Simplified Multicolor Printing, AMS-Optional Design
5 plates 10h 57m 321 g PLA
P1S, A1, H2C, H2D Pro, H2S, X1, H2D, X1 Carbon, X1E, P1P, P2S, X2D, A2L
All parts were printed using 0.2 mm standard settings . • Main body: Printed with default settings, no changes required. • Colored number plates: Surface smoothing enabled with the following parameters: • Smoothing: all surfaces • Smoothing speed: 12 mm/s • Smoothing flow: 18% The colored plates are attached to the steps using super glue after printing. This profile is designed to be easy to print and works without AMS .
Plate Details (5)
0.4 mm nozzle, all plates
Plate 1
4h 54m 256 g PLA · 256 g
Plate 2
1h 46m 19 g PLA · 2 g PLA · 17 g
Plate 3
1h 47m 19 g PLA · 2 g PLA · 17 g
Plate 4
1h 15m 13 g PLA · 1 g PLA · 12 g
Plate 5
1h 16m 14 g PLA · 2 g PLA · 12 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
About this model

I lose track of initiatives as they are being called out, and wanted to design a solution. I brainstormed a few options, and settled on a stairstep board with each number. The initiative tokens fit in each slot, so they can be marked as the initiatives are called.

What I like about this model

I really love that I'll be able to easily remember each players position, and the order of play will be “auto” sorted.

I dig the heatmap of the steps. I have an A1 with AMS lite, so I painted the orange dark green and the red light green, then swapped the filament while it worked on the yellow steps.

I also like the tray for keeping “expired” (monsters who have been eliminated) initiative tokens.

What I'd change/improve

I still think I might like a system where each player turns a dial on a disk for their initiative, then the dials get stacked. I might try to design that later.

I had a brain fart and put a “100” on the chart… This will just be “super 99”.

Heatmap Steps

I have an A1 with AMS lite, so I painted the orange dark green and the red light green, then swapped the filament while it worked on the yellow steps.

No Prime Tower?

I printed it with no prime tower with no problem.

initiative tracker gloomhaven jaws of the lion frosthaven gloom haven jotl initiative
Gloomhaven: Jaws of the Lion box art Gloomhaven: Jaws of the Lion 2020 Layer by Layer
Cover Colors

Main colors from the cover art. Find matching filament, or tap swatches to narrow.

Matching filament