Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Slay The Spire: Board Game Enemy Health Tracker
Scoring & Tracking
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 226 g of filament
From the designer's print profile
Print Profile (2) 0.2mm layer, 2 walls, 15% infill 2h 26m 91 g PLA
0.2mm layer, 2 walls, 15% infill
2 plates
2h 26m
91 g PLA
P2S, H2D, A1, H2S, H2D Pro, X1, X1E, P1S, X1 Carbon, H2C, P1P, X2D, A2L
Ironing enabled. Can do it in half the time by disabling Ironing.
For full set requires printing Inner Trackers 4 times on P1S and P2S
Plate Details (2)
0.4 mm nozzle, all plates
Plate 1 · Outer Trackers
1h 13m
46 g
PLA · 42 g
PLA · 3 g
PLA · 1 g
Plate 2 · Inner Trackers
1h 13m
45 g
PLA · 41 g
PLA · 3 g
PLA · 1 g
[3 Plates, Minimal Swaps (H2D)] 0.2mm layr, 2 wall, 15% fill
3 plates
5h 45m
226 g PLA
H2D, H2D Pro
Setup for efficient printing on H2D. 3 Plates to end up with 4x outer, 16x inner.
Plate Details (3)
0.4 mm nozzle, all plates
Plate 1 · Outer Trackers
1h 14m
48 g
PLA · 45 g
PLA · 2 g
PLA · 1 g
Plate 2 · Inner Trackers Plate1
2h 15m
89 g
PLA · 86 g
PLA · 2 g
PLA · 1 g
Plate 3
2h 15m
89 g
PLA · 86 g
PLA · 2 g
PLA · 1 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
Putting the red cubes was always annoying when sleeves, as they would move around with just touching the table, so I made some health trackers to keep cubes in the right location mostly.
To cover all the spots you need:
- 4x Outer Tracker
- 16x inner trackers (for one scenario, can be lowered to 12 for most scenarios)
They lock into each other, and then you put them under the map in front of of each mini.
/pic9371542.jpg)
