Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Crokinole Button Holder
Organizers
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 59 g of filament
Print Profile (2) 0.2mm layer, 2 walls, 12% infill 1h 56m 59 g PLA
0.2mm layer, 2 walls, 12% infill
1 plate
1h 56m
59 g PLA
X1 Carbon, P1S, X1, H2D, A1, P1P, H2D Pro, X1E, H2S, A1 mini, P2S, H2C, X2D, A2L
• print without support
• the seams are painted on
• can remove the skirt if you want
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
1h 56m
59 g
PLA · 59 g
7.5mm rim version
1 plate
1h 45m
60 g PLA
X1 Carbon, X1E, H2D Pro, P2S, X2D, X1, H2D, H2C, P1P, A1, H2S, A1 mini, P1S, A2L
This is the same model but adjusted to fit a round board with a 7.5mm/0.3in rim.
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
1h 45m
60 g
PLA · 60 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
8 button holder for Crokinole board game (2 player)
Made to press fit onto the rim of the board or to sit on the table next to the board.
Made to printed without supports. I painted on the seams for the best look and functionality (IMO).
IMPORTANT:
The board I referenced is a round Crokinole Canada board with 30.25in diameter and a 0.25in (6.35mm) rim width. The buttons that I referenced have 1.25in (32mm) diameter and 0.38in (9.75mm) width.
You can also check out my 20s holder:
/pic8009621.jpg)
