Exodus Proxima Centauri Ship Miniature Flight Stand with Numbers (1.5mm bore)

Ship miniature stands (1.5mm bore) for Exodus Proxima Centauri.

As numbers are a part of the model there's no need for stickers, good as cheap replacement for anything with the same bore size and definitely stable and usable in all sorts of homebrew ship games.

Easiest way to get them coloured is just grabbing an acrylic paint pen of good quality, I didn't even bothered with, multi colour would take ages for what it is when you're printing an entire set. They are very stable for the size of minis they are serving. Can easily be printed in clear PLA without infil, 2 walls, for the transparent effect.

For Proxima Centauri you need 24 stands per number 1-3 and 18 stands of number 4 for the whole game, 24 per number 1-2 for the base game only - so that's quite a bit.

Printed those no issues at 0.2mm layer (standard 0.4mm nozzle), 10% Cross-hatch infil. I suggest using a large brim (about 2cm) to connect all the pieces if you want to print them in bulk.

There are 2 options available, regular and wider - depending on your models, as it seems the hole bore differs from version to version - also, you can use wider ones if the hole gets lose in time.

Pins that enter the model were sturdy enough in PLA to not worry about them breaking easily.

If you found those useful, and thing you've saved some money and time on searching for stands, feel free tip the hat at: