Wondrous Creatures KS Exclusive Crew and Captain

Made models and printed my own versions of the KS exclusive Crew and Captain.
Best suited to a 0,2mm nozzle, they will print in 0.4mm, but you'll lose detail. The photo is of my prototypes printed with a 0.4mm nozzle. I'll be reprinting with a 0.2 and will update it.

The crew are all done in 4 colours, the Captian I've set to 8 colours. But swaps are minimised by being only a thin layer of colours, while the bulk is one colour.
I just added a second edit of William with only a 2mm layer of colour front and back as that works better with a 0,2mm nozzle. I also went to 10 colours. I'm printing using 1 AMS, so it involves some careful colour swapping and sequencing during the print.

I used 4mm diameter, 2mm deep magnets, glued in place.

You can get the Crew Cards on BGG, https://boardgamegeek.com/filepage/285152/ks-exclusive-crew-set-crew-cards