Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Wanted Luffy Deck Box
Card & Tile Holders
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 171 g of filament
From the designer's print profile
Print Profile (2) 0.2mm layer, 4 walls, 25% infill 5h 54m 193 g PLA
0.2mm layer, 4 walls, 25% infill
1 plate
5h 54m
193 g PLA
X1 Carbon, H2D, A1, X1E, A1 mini, P1P, X1, P1S, H2D Pro, H2S, P2S, H2C, X2D, A2L
Finally, I bring you a .4mm nozzle profile. 4 walls for some extra strength and feel free to let me know if theres any suggestions for it. Thank you!
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
5h 54m
193 g
PLA · 193 g
0.6mm nozzle, 0.24mm layer, 2 walls, 15% infill
1 plate
4h 1m
171 g PLA
X1 Carbon, P1S, P1P, X1, X1E, A1, A1 mini, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
Base Bambu Studio Settings with tree supports for the window.
Plate Details (1)
0.6 mm nozzle, all plates
Plate 1
4h 1m
171 g
PLA · 171 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
Made this deck box a while ago for my Purple Luffy Deck and figured I'd share. The front window fits a standard toploader for safe display of card. Prints in just two pieces and will only need supports for the square hole to see the card. I used tree supports for it and it came out well for me. The box works great and I plan on making a few more versions of different posters as well. I used a 0.6mm nozzle and the base Bambu Studio Print Settings. Keep in mind installing the top as if you print the top with the hinge going with the layer lines, it has a chance to break so you may need to adjust print settings for a stronger hinge. Any suggestions welcome 😅