Insert Organizer for Keyper + Keyper at Sea + Optional Keyper Character Edition

This is a remix of Wylaryzel fantastic Keyper insert to incorporate the Keyper at Sea Expansion as well as a small change to allow for the extra tiles included in the Character Edition of Keyper. I made a new holder for all of the KaS tiles. This fits between the modified player trays. Each of the player trays has room for the 2 KaS starting tiles so I keep them in there on the bottom of the stack. I modified the large tile tray to have space for the extra Character Edition tiles so you only need to print this if you have the Character Edition of Keyper. I also modified the animal trays to be 4mm lower and added a divider on one section of one tray so there would be room to store the KaS fish meeples with the rest of the animals. Put the two smallest animal meeples in the divided section. With the extra vertical space I made a tray to hold the KaS Fish Treasure Tiles and another tray to hold the KaS Season Markers. I also put 4 of the folding boards on the bottom under the Treasure Tiles Tray to make sure there is no lid lift. The rolled up draw bag fits in the small remaining space. I tried many combinations but there was just no way I could keep the cool stands for the animal trays. There is probably enough room but it would require redesigning from the ground up and making all the trays as small as possible. Finally the other compromise was the solo board and solo rules. These will cause substantial lid lift so, since I do not play solo, I decided to just keep those in the KaS Box which you probably will use anyway playing solo since it has the player aids on the bottom of the box. Lastly the tolerances are tight on the player trays and KaS Tile tray so make sure you have no elephants foot on you prints and I had to orientate the player trays with the small end outward to get a tiny bit extra space. (The box is slightly smaller in the corners so the big side of the player tray will push in a tiny bit more.)