Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Tea Witches Insert – Sleeved, Setup-Ready Trays
Inserts
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
✓ Fits sleeved cards
✓ Requires supports
About 1,286 g of filament
Print Profile 26h 43m 1,286 g PLA
What it takes
10 plates
26h 43m
1,286 g PLA
H2C, H2S, H2D Pro, H2D
The full insert, one piece per tray, for H2-series printers (the Top Layer is 282 mm square). 10 plates, about 26 h 40 m and 1,281 g of PLA. 0.20 mm Standard.
The insert parts are on slot 2. The 4 player trays use slots 3–6 (blue, green, pink, red), one plate each. Only the Top Layer has supports, under its corner lids, and they're already set.
On a 256 mm bed (X1/P1/P2S/A1)? Use the "256 mm bed" profile instead.
Plate Details (10)
0.4 mm nozzle, all plates
Plate 1 · Main Tray
4h 27m
244 g
PLA · 244 g
Plate 2 · Upper Tray
4h 23m
239 g
PLA · 239 g
Plate 3 · Bowl Tray
3h 26m
149 g
PLA · 149 g
Plate 4 · Top Layer (supports under the corner lids)
7h
337 g
PLA · 337 g
Plate 5 · Toppings Tray
1h 10m
60 g
PLA · 60 g
Plate 6 · Coin Tray
1h 21m
49 g
PLA · 49 g
Plate 7 · Player Tray - Blue
1h 8m
54 g
PLA · 54 g
Plate 8 · Player Tray - Green
1h 24m
51 g
PLA · 51 g
Plate 9 · Player Tray - Pink
1h 20m
51 g
PLA · 51 g
Plate 10 · Player Tray - Red
1h 5m
52 g
PLA · 52 g
Designer's Description
Just in time for Halloween. 🧙♀️🍵
A complete insert for Tea Witches that fits the whole game, cards sleeved, back in the original box, in layers you lift out in setup order.
What's in it
- Top layer: sits under the rulebook, with 4 corner lids.
- Upper tray: holds the board and the card decks.
- Main tray: sleeved card wells with finger slots, a round well for the big 3D piece, stepped coin slots, and open bins for the small tokens.
- Bowl tray: the ingredient bowls and their tokens.
- Toppings tray and coin tray .
- 4 player trays (blue, green, pink, red). Hand one to each player and setup is done.
Print notes
- PLA, 0.2 mm. The 3MF has the insert in one colour and each player tray in its own colour. Print it in whatever colours you like; mine are purple and pink.
- Only the Top Layer needs supports, under its 4 corner lids. They're already set in the 3MF.
- Two print profiles: Complete Set (H2 series) , 10 plates, about 26.5 h and 1.3 kg. Complete Set – 256 mm bed (X1/P1/P2S/A1) : the big parts are split and joined with dovetail keys. Glue them with CA or plastic cement. The assembled insert is the same shape.
Unofficial fan-made accessory. Not affiliated with the publisher.
