LayerUp Stats 9
Add Jul 14, 26 Sync Aug 29, 26
Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

Battle Marmot's Dice Box V2

for Tabletop Accessories Layer by Layer
Blind Badger
Dice Towers & Trays Free
View on MakerWorld 449 1,146 Added Dec 27, 24 | Updated Aug 29, 26 Support Blind Badger by Liking and Boosting their model.
Remix View the original model
Plan Your Print
About 333 g of filament From the designer's print profile
Print Profile (7) V2.1 - Updated Box and Tower w/Notch 7h 42m 349 g PLA
V2.1 - Updated Box and Tower w/Notch
3 plates 7h 42m 349 g PLA
X1 Carbon, P1P, X1E, P2S, A1, A1 mini, X1, H2D Pro, H2D, H2S, P1S, H2C, X2D, A2L
Same as V2 EXCEPT: • Added some ledges to better hold the dice tower in place (thanks for the suggestion @user_2446685963 ) • Notched the tower to accomodate that • Added a more aggressive fillet on the back of the tower to let it fit better against the edge of the dice tower spot • Minor adjustments to the interior of the dice tower to avoid the walls getting too thin near the notches. Lid remains the same and the whole thing remains compatible with any previously printed lids.
Plate Details (3)
0.4 mm nozzle, all plates
Plate 1 · Plain Box
4h 3m 193 g PLA · 193 g
Plate 2 · Plain Lid
2h 2m 86 g PLA · 86 g
Plate 3 · Tower
1h 38m 70 g PLA · 70 g
Lid - Dragon Scale
4 plates 15h 376 g PLA, PETG
X1 Carbon, H2S, H2C, H2D Pro, A1, X1E, P1S, X1, H2D, P2S, P1P, X2D, A2L
Cut 0.5mm deep dragonscales patterns into the lid. These scales are not based on anyone else's models but based on various designs I saw on the internet and then drew myself. Plate 1: Single Color Print Plate 2: Dual Color Print (Color Shift at layer 4, AMS recommended), standard supports Plate 3: Like Plate 2 but using PETG for supports throughout with 0mm spacing from the bridging layer, giving a mostly smooth finish between the scales Plate 4: Same as Plate 2 but using PETG supports have a 0.2mm spacing from the bridging layer giving a rough organic finish between the scales
Plate Details (4)
0.4 mm nozzle, all plates
Plate 1 · Single Color
3h 31m 91 g PLA · 91 g
Plate 2 · Dual Color - AMS
3h 36m 92 g PLA · 77 g PLA · 15 g
Plate 3 · PETG Support - Smooth Under Scales
4h 10m 99 g PLA · 78 g PETG · 6 g PLA · 15 g
Plate 4 · PETG Support - Rough Under Scales
3h 43m 94 g PLA · 77 g PETG · 2 g PLA · 15 g
Colored Dragon Scales Lid - Color Shift at Layer 4 for AMS
1 plate 3h 22m 94 g PLA
X1 Carbon, P1P, P1S, X1E, H2D Pro, X1, H2D, H2S, A1, H2C, P2S, X2D, A2L
Dragon Scale Lid with color change at layer 4
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1 · Lid-DragonScales
3h 22m 94 g PLA · 15 g PLA · 79 g
Colored Dragon Scales Lid - Pause at Layer 4 for no AMS
1 plate 3h 19m 93 g PLA
X1 Carbon, P1S, P1P, H2S, A1, H2D, P2S, X1, A1 mini, X1E, H2D Pro, H2C, X2D, A2L
Pause inserted at Layer 4 to allow manual filament change to get the same dual color effect for those without an AMS
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1 · Lid-DragonScales
3h 19m 93 g PLA · 93 g
OLD - Smooth and Plain Box, Tower, and Lid
3 plates 8h 12m 333 g PLA
X1 Carbon, P1P, X1E, P2S, A1, A1 mini, X1, H2D Pro, H2D, H2S, P1S, H2C, X2D, A2L
Original models with smooth textures (lack of any significant texture features). UPDATE: Split the dice tower to it's own build plate to reduce the chance of it warping on the build plate.
Plate Details (3)
0.4 mm nozzle, all plates
Plate 1 · Plain Box
4h 20m 184 g PLA · 184 g
Plate 2 · Plain Lid
2h 8m 82 g PLA · 82 g
Plate 3 · Tower
1h 43m 67 g PLA · 67 g
OLD - Smooth Box, Tower, and Lid - With Brims
3 plates 12h 19m 348 g PLA
X1 Carbon, P1S, P1P, H2S, A1, H2D, P2S, X1, A1 mini, X1E, H2D Pro, H2C, X2D, A2L
Per @user_3165686450 suggestion, added a version of the print profile with a rather large brim to help with concerns about warping at the edges with such a large flat surface. Hope it helps! :)
Plate Details (3)
0.4 mm nozzle, all plates
Plate 1 · Plain Box
6h 40m 192 g PLA · 192 g
Plate 2 · Plain Lid
3h 3m 86 g PLA · 86 g
Plate 3 · Tower
2h 36m 70 g PLA · 70 g
Lid - Turtle
3 plates 10h 3m 265 g PLA, PETG
X1 Carbon, P1S, P1P, H2S, A1, H2D, P2S, X1, X1E, H2D Pro, H2C, X2D, A2L
Turtle Design ported over from the mini box (finally printed this in a larger version to confirm it works and to get a proper picture). This requires some post processing to get the supports out as they're thin. Three plates are for three purposes: Plate 1: Single Color Print, No AMS required. Plate 2: Dual Color Print, AMS recommended. Plate 3: Dual Color Print w/PETG as support interface layer. This gives the best finish IMO but does require two rounds of removing supports (the PLA support base, then the PETG interface, since it doesn't stick together.
Plate Details (3)
0.4 mm nozzle, all plates
Plate 1 · Lid-Turtle - Single Color
3h 11m 86 g PLA · 86 g
Plate 2 · Lid-Turtle - Dual Color
3h 23m 89 g PLA · 86 g PLA · 3 g
Plate 3 · Lid-Turtle - Dual Color PETG Support
3h 29m 90 g PLA · 85 g PETG · 2 g PLA · 3 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description

This deluxe dice box is drawn completely from scratch based on measurements from my wife using FreeCAD (though heavily inspired by my remix of one of my favorite dice boxes ). I sized to fit just about any normal pencil or pen in the right slot, hold two standard sized minis (even some tall ones) in the bottom slots, and three dice sets on the right slots.

The dice tower is also drawn from scratch and is a smooth fit (set it down and it will glide into place as it displaces the air cushion beneath it).

While the whole setup is fairly slim in height, the dice tower does barely fit the “giant dice” from Chessex and easily fits even the commonly slightly oversized metal dice.

In the pictures, my wife (Battle Marmot) cut and fitted some sparkly foam to help cushion the dice as they land. As a result, the dice tower is actually 1mm shorter/thinner than the upper ledge of the slots to accommodate anyone who might desire to do something similar.

I hope you enjoy this as much as we do!

Changes:

  • 2024-12-27: Dragon Scale lid uploaded as a separate print profile (also drawn/patterned by me, it's not based specifically on any one design and not related to the original remix)
  • 2025-02-18: V2.1 Added V2.1, which adds a lip to the dice tower pocket better hold the dice tower in place when upright and updates the dice tower with notches to accommodate the new shape (also slightly shunk the interior to ensure adequate wall thickness near the notches). V2 original files are still available for those who don't want that.
dice dungeons dragons roller tower pen pencil travel kit