Pioneers (w/ Queenies) – Board Game Organizer / Insert (3D Print STL)

This 3D printable organizer is designed for **Pioneers** by Queen Games and includes storage for the **base game plus all three Queenies**. The insert is intended to fully replace the original box insert and provides a secure, flush fit for all components inside the original game box.

All trays interlock to prevent movement during storage or transport. Once everything is packed, the player boards sit flush on top of the insert, followed by the game board. A dedicated spacer is placed on top of the board to lock the entire system in place and eliminate lid lift.

This insert follows a *strictly functional, material-efficient* design approach. No decorative elements are used. Every wall, cutout, and divider exists to improve organization, reduce setup time, and minimize filament usage and print time while maintaining structural strength.

- Full storage solution for Pioneers base game
- Includes storage for all 3 Queenies
- Replaces the original box insert entirely
- Interlocking tray system to prevent shifting
- Player boxes designed to sit flush with surrounding trays
- Dedicated trays for tiles, carriages, money, gold, cards, and player components
- Spacer locks everything in place above the board
- Support-free geometry optimized for FDM printing
- Designed for fast setup and teardown

- Original insert is **not used**
- All components fit directly into the box using this organizer
- Player boards rest flat on top of the trays
- Game board sits on top of player boards
- Printed spacer goes above the board to ensure a tight, movement-free fit

- Layer Height: 0.20 mm (Standard Quality)
- Infill: 15% (Grid or Gyroid recommended)
- Walls/Perimeters: 2–3
- Supports: Not required
- Material: PLA recommended
- Bed Adhesion: None, or brim if needed
- Orientation: Flat on the base

- Player Box x4
- Player Lid x4
- Base Game Tiles x1
- Starting Carriages Tray x1
- Carriages Tray x1
- Money Box x1
- Money Lid x1
- Gold Box x1
- Gold Lid x1
- Queenies Tiles Tray x1
- Queenies Tiles #2 Tray x1
- Spacer x1

- Print one of each file unless otherwise noted in the filename
- Player Boxes and Lids are printed in sets of four
- Gold Box has the same exact size as player box with just one compartment, so feel free to print that as a player box (mix and match as well)

This organizer is designed to fully consolidate Pioneers and all Queenies into a single, stable storage system. The interlocking layout and spacer-based locking mechanism ensure nothing shifts inside the box, even during vertical storage.

This listing is for **digital 3D model files (STL)** only. **No physical items or printed inserts will be shipped.** You are responsible for printing the files yourself or through a third-party printing service.

This organizer is an independent, fan-made project created out of appreciation for Pioneers. It is *not affiliated with, endorsed by, or sponsored by* Queen Games, the designer, or any rights holders. All game names and trademarks remain the property of their respective owners.