Unfathomable (supports From the Abyss Expansion) Insert

Unfathomable and From the Abyss Expansion Insert

No lid lift
Supports sleeves (I use sleeve kings brand standard thickness sleeves)
Supports vertical or horizontal storage (nothing should move around, even if you shake the box)

Note on multi color printing for text:
All of the multi color printing for this insert was accomplished with adding pauses in the slicer and doing filament swaps.
If you would like details on how to accomplish this with your printer and slicer, do a google search like 'how to I add pauses in Bambu Studio for filament swaps'. Basically, you slice the model, go to the layer you want a filament swap at (one for the text color then possibly one to change back to the predominant color) then you will issue the command to add a pause (right click on the slider for most slicers).

Longest model : 210mm x 58mm
Total grams at default .2 bambu lab slicer settings (except 8% gyroid infill) : 840

Print settings : normal for your filament, no supports needed and I recommend 8% infill minimum

My priorities when designing inserts:
Reduce game setup and tear-down time
Support sleeved cards
No (or very little where impossible) lid lift
Engineer models that do not need any support
Create models that optimize filament use (when possible)
Include trays that can be used during gameplay