Insert for Joyride Turbo w/upgrades + extras

No lid lift
Supports vertical or horizontal storage (nothing should move around, even if you shake the box)
Print settings : normal for your filament, no supports needed and I recommend 10% infill minimum (you can get away with less depending on the infill type and filament brand/material)
There is a spot for everything.

Print one of every part except the two pieces that include a multiplier in front of their name (Layer 3 2x - Damage Token Tray, and Layer 3 6x - Common Car Tray) - print the indicated quantity of these.

Note : There are two versions of the Layer 5 - Checkpoint piece (Layer 5 - Cardboard Checkpoints & Layer 5 - Upgraded Checkpoints), if you are using the original cardstock checkpoints, use the one for Cardboard Checkpoints, if you are using the upgraded thick wooden checkpoints or the 3d printed ones included here, use the one labeled upgraded checkpoints. There is no reason to print both.

Note on extra pieces/upgrades : I have included models for the thick checkpoint hex's, a model for the thick damage token and a model for the printed initiative track (see pics for all of these printed upgrades). If you wish to print these, I suggest you use a 3d printer capable of multiple colors (I used my bambu p1p with attached ams). See the pics for examples of the colors of filaments I chose to closely match the originals. The only exception to the multi-color filament suggestion might be the initiative track since you print the individual pieces and glue them to the base.