Insert for Vagrantsong Deluxe Big Box

Insert for Vagrantsong Deluxe Big Box

No lid lift
Supports sleeves (I use sleeve kings brand standard thickness sleeves)
Supports vertical or horizontal storage (nothing should move around, even if you shake the box)

Note : I have the 3d printed token protectors, I do not have acrylic pieces but I believe they are the same thickness as the token protectors. If you have the acrylic pieces and they do not fit, I am more than happy to immediately upload a version based on your measurements.

Note : This insert is NOT for the thinner retail box, it is for the big box (approx. 8 inches/ 205mm outside height)

Note : I don't have the player mini's or the haint minis but have attempted to accommodate them in my design. If you have the mini's and there is a fitment issue, please reach out and I will correct the insert models.

Note : This is made either for token protector rings or the deluxe acrylic tokens, NOT bare cardboard. If you want to print some token protectors, I recommend these :

https://www.printables.com/model/919780-22mm-token-capsule-vagrantsong-bindle-coin-event-a/files

Option : if you don't want to print the player trays that are stored on layer 1, please just print 2 more of the level 1 spacer pieces instead.

Print settings : normal for your filament, no supports needed and I recommend 10% infill minimum (you can get away with less depending on the infill type and filament brand/material)

To print raised text on divider cards : add a pause after printing the flat part of the card before printing the raised text (for .2 mm layer height = pause at 4mm or layer 2), change filament then print the rest of the model.

There is a spot for everything and plenty of empty room.
I will update this design if another expansion comes out and I can modify my design to include it
(should be able to because of the empty space in this insert but I don't know what the content of future expancsions will be).