Twilight Imperium Action Cards Carrier Tray

for Twilight Imperium: Fourth Edition (2017) Lift the Lid

Inserts Free

View on MakerWorld 24 87 Added Feb 21, 26 | Updated Oct 3, 26 Support Cat for Scale by Liking and Boosting their model.

Plan Your Print

✓ Covers Twilight Imperium: Fourth Edition – Thunder's Edge, Twilight Imperium: Fourth Edition – Prophecy of Kings

About 106 g of filament

Print Profile (2) 0.08mm layer, 2 walls, 8% infill, large print bed 10h 10m 106 g PLA

0.08mm layer, 2 walls, 8% infill, large print bed

1 plate 10h 10m 106 g PLA

H2S, H2D, H2D Pro, A2L, H2C

I recommend printing this model between 0.08 and 0.12 layer height using a 0.4mm nozzle, if you want extra details and minimize stair stepping effects or other print artifacts. Supports are not strictly needed (I have printed without, but I kept them enabled since Bambu Studio would complain about it by default).

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

10h 10m 106 g PLA · 106 g

0.08mm layer, 2 walls, 8% infill, small print bed

2 plates 10h 4m 101 g PLA

A1, P2S, X1E, X2D, H2D Pro, P1P, H2D, P1S, X1 Carbon, A2L, H2C, H2S, X1

Just the same profile as the main profile for H series printers but with items arranged on 2 plates for smaller printers (eg. A1, P series, etc.). I recommend printing this model between 0.08 and 0.12 layer height using a 0.4mm nozzle, if you want extra details and minimize stair stepping effects or other print artifacts. Supports are not strictly needed (I have printed without, but I kept them enabled since Bambu Studio would complain about it by default).

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1

6h 1m 54 g PLA · 54 g

Plate 2

4h 3m 47 g PLA · 47 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

Twilight Imperium TI4 carrier ship unit action cards tray

Hello, fellow Twilight Imperium player! If you are looking for a tray capable to hold the incredible amount of action cards (ACs) AND entertain your companions with a piece of great table presence, this is it!

This action cards tray is modeled after a carrier ship unit from TI4 (Twilight Imperium 4th edition), but substantially modified to hold all cards from base game, the Prophecy of Kings expansion and the Thunder's Edge expansion (which means all the action cards released in the various Codex PnP releases). There's room for more if you have any homebrew cards to add.

The model comes with a divider to create a discard pile as well. The divider stays in place with a simple ratcheted edge so it's not easily dislocated when interacting with the deck or the discard pile.

👉 Check out my other Twilight Imperium models! 👈

🏗️ Assembly instructions

To make the model support free I opted to slice the model so you will need to glue three pieces together, using some pegs (cylinders) the model comes with. Just apply some superglue and hold tight the three sections together (best to glue two sections at the time). As you can see from the photos published here, you won't notice the seams once assembled.

The two halves of the discard pile divider need gluing as well. You can print these in a different color if you'd like.

twilight imperium ti4 ti twilight imperium 4