King of Tokyo Insert

for King of Tokyo (2011) Layer by Layer

fatpretzel

Inserts Free

View on Printables 31 210 2,119 Added Feb 29, 24 Support fatpretzel by Liking and Boosting their model.

Remix Reworks another design; the description credits the original.

What changed: This version holds two less monsters and accommodates sleeved cards.

Plan Your Print

✓ Fits sleeved cards

Designer's Description

I saw JokemanJim's fantastic organizer for King of Tokyo and I knew that this was the best storage solution I had seen yet for KoT. Unfortunately, his version did not support sleeved cards. I also only had 11 of the 13 monsters so this was a good excuse to remix his organizer.

This thing used up an entire roll of filament so it will add some weight to your box. I recommend printing with Lightning support or use Gradual Infill Steps to lessen your print time and filament usage.

I printed this on my Anycubic Kobra Plus using Overture Neon Green Silk PLA. The Monster tray is huge at 64 x 246mm. My settings for the Monster Tray are below:

Actual Print Time:

1d 13h 30m

Filament Usage:

Overture Neon Green Silk PLA

Actual:

515 grams

Notes:

Profile: Suggested parameters for PLA_V1.0 Filament: Generic PLA Objects: Monster Tray.stl Move: 0 x, 0 y, 0 z Scale: 131 x, 246 y, 64 z Settings: Quality Layer Height: 0.2 mm Line Width: 0.4 mm Walls Wall Line Count: 3 Top/Bottom Top Thickness: 1.2 mm Bottom Thickness: 1.2 mm Infill Infill Density: 25% Infill Pattern: grid Material Printing Temperature: 215°C Build Plate Temperature: 60°C Speed Print Speed: 80 mm/s Cooling Enable Print Cooling: True Fan Speed: 100% Support Generate Support: False Support Structure: tree Support Placement: buildplate Build Plate Adhesion Build Plate Adhesion Type: brim

kingoftokyo