AnySize Mat storage

Anysize mat storage

This object consists of 3 part:

• Bottom
• Top
• Extender

Boh parts exists in a circular form and in a decagon form. The idea with the decagon is to print one of the parts as a decagon to avoid them roling of shelves or tables.

It is not adviced to print the entire mat holder as a decagon form, as it is very difficult to align the egdes (especially with use and wear).

Each part exsists in the following diameters

• 50mm
• 60mm
• 70mm
• 80mm
• 90mm
• 100mm
• - Send me a PM if you need further diameters

Each part exists in these lengths:

• 10mm
• 50mm
• 100mm
• 150mm
• 200mm
• 250mm
• 300mm
• - Send me a PM if you need further lengths

In total: 126 STL files.

Then its simply a matte rof measuring the diameter and length of your mat when rolled up and start printing.

The big example in the images are 70mm diameter, 200mm Bottom, 2x200mm extender, 100mm Top

The small example in the images are 50mm diameter, 10mm Bottom, 2x200mm extender, 10mm top

Warning :
The part are made in a way, that if printed "correct", they will never pinch or damage mat, however - certain print artifacts - like seem - could damage the mats. Therefor please inspect the part prior to storing your mat.

Note

The top and bottom part in some of the pictures one have 50 facets which become obvious the bigger the diameter. The files included here have 100 facets and can be increased upon request.