Munchkin Big Box Organizer

An original insert for the Munchkin Big Box, plus Munchkin Second Edition and expansions. This was designed for all the cards and components that come in the big box, with room for the second edition cards and boards, or you can fill it with the many, many expansions and promos that are available.

Notable Details:

• Coin trays with dedicated sections and imprints for each denomination. Split your 1s and 5s or use one tray each for the coins that come with the upgrade set and second edition.
• Print as many card dividers as needed; their positions are adjustable.
• Instruction books from the expansions are the perfect size to store alongside the oversized cards, so that well is larger than needed.
• No lid lift if only storing the big box boards and instructions. There is about 5mm of lift if you're also storing the boards and instructions from the second edition.
• To give an idea of the capacity of this insert, pictured with this model is the Munchkin Big Box cards and components (Munchkin 2: Unnatural Axe, Munchkin 3: Clerical Errors, Munchkin 6: Double Dungeons, Munchkin Bosses, Munchkin Side Quests 1 & 2, 50 New Cards, 40 Blank Cards), Big Box Upgrade Set, Munchkin Second Edition cards and components, Munchkin 4: The Need for Steed, Munchkin 5: De-Ranged, Munchkin 8: Half Horse Will Travel, Munchkin 9: Jurassic Snark. Approximately 1,230 cards with room for more.
• May support sleeves, but tolerances are tight for the standard cards. Snug fitting sleeves might work.

Print Notes:

• Print coin_tray 2x, standard_card_holder 8x, card_divider ?x (I did sets of 6 at a time, 3 times, for 18 dividers).
• Some parts, like card dividers, might need a brim to avoid corners lifting off the plate (6mm works well).
• Nothing needs supports.
• Printed in Polymaker Panchroma Matte PLA (I used Charcoal Black for all holders and Dual Shadow Red for the card dividers, which is a close match to the box color).

Like my design and want to show support?