Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Wyrmspan Coins
Tokens & Resources
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 26 g of filament
From the designer's print profile
Print Profile 2h 49m 26 g PLA
What it takes
2 plates
2h 49m
26 g PLA
X1 Carbon, P1S, P1P, X1, X1E, A1, A1 mini, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
No support is needed, even though you'll get a warning about it. Supports will ruin the print, so be sure they're turned off.
Plate Details (2)
0.4 mm nozzle, all plates
Plate 1 · 02
2h 11m
18 g
PLA · 18 g
Plate 2 · 01
37m
8 g
PLA · 8 g
Designer's Description
These coins are almost exactly the same size as the original paper ones. They consist of 2 parts, a disk and the shell. The shell has a “heads” side and a “tails” side.
You should print the disks first, and you might want to print small batches in different colors. The shells will pause printing when they're ready to have the disks inserted. While you're inserting the disks, you'll probably want to turn the fans down low, so the disks don't blow around. After you insert the disks, restart the print, and keep an eye on it until the printer gets another layer down to secure the disks in place. You might have to pause and re-insert a few.
