LayerUp Stats 6
Add Jul 14, 26 Sync Aug 31, 26
Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

Universal Parametric Card Case

for Tabletop Accessories Layer by Layer
GraysonTidbury
Card & Tile Holders Free
View on MakerWorld 627 1,069 Added May 30, 26 | Updated Aug 31, 26 Support GraysonTidbury by Liking and Boosting their model.
Plan Your Print
About 80 g of filament From the designer's print profile
Print Profile (2) Standard 52 Card Case 4h 1m 80 g PLA
Standard 52 Card Case
1 plate 4h 1m 80 g PLA
P1S, H2C, H2S, X1, P2S, X1 Carbon, A1, A1 mini, H2D, X2D, A2L, P1P, X1E, H2D Pro
0.1 MM Layer Height 22 Percent Infill
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
4h 1m 80 g PLA · 80 g
Chamfered edges for easier print + adjustable Text
1 plate 1h 56m 59 g PLA
P2S
I found this model and was instantly amazed, so I printed it right away. I found the rounded corners facing the buildplate can't be printed very well, so I adjusted the model to a combination of chamfered and rounded edges to get a smoother finish. Many thanks to the creator for uploading the .f3d file! Let me know if you need my remixed version to also upload it. And I also added adjustable text to the top part, so you can easier tell which game you pick. Besides that it uses similar settings than the original print profile → 0.2mm layer, 2 walls, 15% adaptive cubic infill
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1 · Plate 1
1h 56m 59 g PLA · 38 g PLA · 21 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description

Boost Me I REALLY WANT YOU TO JUST PRESS THAT BUTTON!! I spend a long time making these models to what seem to be my perfectionist standards. Every boost that is given gets me a dollar closer to getting my very own (free) 3D Printer. I WOULD REALLY APPRECIATE IT!!!!

I have finally made it: a Parametric Card Case! If you do not know already, the parametric capabilities of this model allow for you to adapt the model to any deck imaginable. This has been a long time in the making, as I promised it about 2 months ago, but it's here today. It is a new version of my previous case that was loved by many. It retains what many loved about the old case; the swoopy design, the ability to close at any angle, the protection of plastic, and the beloved satisfying SNAP. The parametrics included with this version only build on this. It adds the ability to adjust just about everything you might want to change about the model allowing you to fit in literally any type of deck, card, or trinket you can think of to put in a case. This model truly has endless possibilities!

Version 1.1 Spegetti + Droop Fix

If you want Version 1.0 File please message me! This fix addresses the speghetti issue that is caused when you incrrease the deck thickness by any amount, which results in one side of the case printing 9 layers off of the build plate and a failed print. Additionally I slightly modified the bottom sides of the case to have a fillet that combats drooping. Happy Printing!

parametric case playing playing card deck box no ams noams

More by GraysonTidbury

Snap - A Perfect Card Case
Snap - A Perfect Card Case
See more prints by GraysonTidbury...