Game Storage Box | Universal Organizer Trays

Tired of digging through scattered tokens, meeples, cards, and bits during setup? These modular game organization trays are designed to:

• Streamline setup and teardown.
• Play & Store pieces with the same container, helps the games hit the table more often.
• Be More Versatility than game specific box inlays. Reuse with new games as the library morphs.

• Rounded Edge → Items & tokens slide out easily | No more fishing for tokens!
• Magnetic Lid → Latches securely + is fun to fidget with | Stays closed during transport and won't pop off accidentally.
• Rubber feet → stays put on the table when pulling out pieces.
• Multiple Divider Layouts + customizable movable divider option!
• Trays Stack neatly in the bottom of standard game boxes .
• Height clearance in the box — leaves plenty of room for folded boards, rulebooks, and inserts on top.

Boost Me Help me end the suffering of disorganized game players by boosting this model so I can get it out into the world!

##

For magnets there are two options, 6x4mm & 6x3mm. Ideally you want a Neodymium Magnet with a grade of N52, the strongest pull force for a given size. The bambu supplied magnets are N35 which is the lowest grade & weakest. But they do work. If you opt for the 6x3mm Magnets it is HIGHLY RECOMMENDED to get a N52 Grade, a dedicated magnet supplier or high quality off of Amazon.

• 4: 6x4mm Magnets Or 6x3mm Magnets ( will have less closing force)
• 4: Rubber Anti-Slip Feet
• 1: Super Glue Gel

• Multi-plate .3MF project (Bambu Studio ready) with different divider options on separate plates — pick and choose what you need.
• Precisely designed pockets for 6×4mm magnets & 6x3mm magnets — strong, reliable closure every time. Chose the appropriate print profile
• Prints beautifully in Matte PLA — layer lines virtually disappear for a premium, professional finish.

Included is a special plate with a movable divider system ! In Bambu Studio:

• Select the movable divider body.
• Copy it (Ctrl+C / Cmd+C).
• Paste (Ctrl+V / Cmd+V).
• Translate (move) the copies side-to-side to create custom compartment widths. Super flexible — tailor the trays to any game!

• Layer Height: 0.2mm
• Infill: 15–20%
• Material: Matte PLA (for best aesthetics)
• Supports needed for the lid magnet indentations.
• Brim ears recommended when printing with Matte PLA to prevent the print from lifting
• If printing multiple containers at once, print boxes and lids separately to prevent excessive layer shrink lines

• Use Super Glue Gel to secure magnets to the boxes / lids. The gel version helps keep the glue from running everywhere
• Assemble your first Box & Lid, then use that as the magnet orientation template for any subsequent boxes, to ensure that all your lids and boxes are compatible.
• Press magnets all the way into the print, they should be slightly recessed to prevent wobbly lids
• Attach Rubber Anti-Slip Feet

Great for board game enthusiasts, insert designers, and anyone who wants organized, portable component storage. Print a set for your favorite games today! 🎲🗳️